Raspberry Pi Build HAT Power Supply

Deze 48W voeding is speciaal ontworpen voor de Raspberry Pi i.c.m. de Raspberry Pi Build HAT. Deze voeding voorziet de Build HAT, de aangesloten LEGO® Technic™ motoren en de Raspberry Pi van spanning.

De Raspberry Pi Build HAT is compatibel met LEGO Technic motoren en sensoren opgenomen in het LEGO® Education SPIKE™ Portfolio. De Raspberry Pi Build HAT combineert de rekenkundige kracht van de Raspberry Pi met de bouwmogelijkheden van LEGO® Technic om je te helpen creatieve en unieke projecten te ontwikkelen..

Specificaties

Output

• Output voltage: +8.0V DC
• Minimum load current: 0.01A
• Nominal load current: 6.0A
• Maximum power: 48.0W
• Load regulation: ±5%
• Line regulation: ±5%
• Ripple & noise: 200mVp-p
• Rise time: 100ms maximum to regulation limits for DC outputs
• Turn-on delay: 3000ms maximum at nominal input AC voltage and full load
• Protection: Short circuit protection, overcurrent protection and overvoltage protection
• Efficiency: 87.77% minimum (output current from 100%, 75%, 50%, 25%)
• Output cable: 1.5m 16AWG
• Output connector: Barrel connector, 5.5mm × 2.1mm × 11mm, centre positive

Input

• Voltage range: 100-240Vac (rated) 96-264Vac (operating)
• Frequency: 50/60Hz ±3Hz
• Current: 1.2A maximum
• Power consumption (no load): 0.1W maximum
• Inrush current: No damage shall occur and the input fuse shall not blow