MICS6814 3-in-1 Gas Sensor Breakout (CO, NO2, NH3)

Productcode: PIM-569
MICS6814 3-in-1 Gas Sensor Breakout (CO, NO2, NH3)
MICS6814 3-in-1 Gas Sensor Breakout (CO, NO2, NH3)
MICS6814 3-in-1 Gas Sensor Breakout (CO, NO2, NH3)
MICS6814 3-in-1 Gas Sensor Breakout (CO, NO2, NH3)
MICS6814 3-in-1 Gas Sensor Breakout (CO, NO2, NH3)
MICS6814 3-in-1 Gas Sensor Breakout (CO, NO2, NH3)

Omschrijving

Measure changes in the concentration of gases including carbon monoxide (CO), nitrogen dioxide (NO2), and ammonia (NH3) with this Breakout Garden compatible I2C breakout.

The MICS6814 sensor comprises three semiconductor gas sensors in a single package, and can detect three different groups of gases that are referred to in the datasheet as reducing, oxidising, and NH3. The major gases/vapours that the sensor detects are: carbon monoxide (reducing), nitrogen dioxide (oxidising), and ammonia (NH3), but it is also sensitive to others, including hydrogen, ethanol, and hydrocarbons.

It can be used to make qualitative measurements of changes in gas concentrations, so you can tell broadly if the three groups of gases are increasing or decreasing in abundance. Without laboratory conditions or calibration, you won't be able to say "the concentration of carbon monoxide is n parts per million", for example. There's more info about the MICS6814 sensor and how it works in Pimoroni's Getting Started with Enviro+ tutorial.

This breakout uses a Nuvoton microcontroller which handles the I2C and analog-digital conversion, as well as controlling the sensor's inbuilt heater and the user controllable RGB LED. The LED could be used to indicate when the sensor is running or to notify you visually of gas concentration changes. It's Breakout Garden compatible, which means you can use it with any of Pimoroni's Breakout Garden HATs and pHATs - no soldering required!

It's useful for incorporating into indoor and outdoor air quality monitoring systems, especially if you're interested in monitoring agricultural and vehicle pollution levels.

Features

  • MICS6814 analog gas sensor (datasheet and FAQ)
  • Nuvoton MS51XB9AE MCU
  • RGB LED
    • 2x M2.5 mounting holes
    • I2C interface, with a default address of 0x19.
    • 3V to 5V compatible
    • Reverse polarity protection
    • Raspberry Pi-compatible pinout (pins 1, 3, 5, 7, 9)
    • Compatible with Raspberry Pi (Python library)
    • Compatible with Raspberry Pi Pico (C++/MicroPython libraries).
    • Schematic

    Pimoroni designed this breakout board so that you can solder on the piece of right angle female header and pop it straight onto the bottom left 5 pins on your Raspberry Pi's GPIO header (pins 1, 3, 5, 7, 9).

    MICS6814 3-in-1 Gas Sensor Breakout (CO, NO2, NH3)
    € 26,95
    Incl. 21% BTW
    € 22,27 Excl. BTW
    7 stuk(s) direct uit voorraad leverbaar.

    Voor 17:00 uur besteld, is vandaag verzonden.
    Verzonden vanaf € 2,95 binnen Nederland.
    Gratis verzending vanaf € 100,00.
    AantalKortingPrijs
    10+-6%€ 25,34 p/s
    50+-12%€ 23,72 p/s

    Documentatie

    Pakket Inhoud

    • MICS6814 Gas Sensor Breakout
    • 1x5 straight male header
    • 1x5 right angle female header

    Specificaties

    Algemeen
    ProductcodePIM-569
    MerkPimoroni
    EAN769894017838
    MPNPIM569
    Technisch
    Ingangsspanning3-5 VDC
    ProtocolI2C
    Overig
    Afmetingen23 x 20 x 4mm

    Reviews

    Schrijf review

    Om een review te schrijven moet je inloggen of je eerst registreren