Door de enorme drukte tijdens onze sale duurt het verwerken van bestellingen wat langer dan je gewend bent. Bedankt voor je begrip.

Tiny 2040 - 2MB

Tiny 2040 - 2MB
Tiny 2040 - 2MB
Tiny 2040 - 2MB
Tiny 2040 - 2MB
Tiny 2040 - 2MB
Tiny 2040 - 2MB
Tiny 2040 - 2MB
Tiny 2040 - 2MB

Omschrijving

A postage stamp sized RP2040 development board with a USB-C connection and 2MB flash. Perfect for portable projects, wearables, and embedding into stuff.

The Raspberry Pi Pico is a nice device. But over at Pimoroni they also wanted something smaller and with a bunch more flash on board. So they created the Tiny 2040 - a teeny tiny powerhouse with the chops to realise truly ambitious projects.

Powered and programmable via USB-C, Tiny 2040 comes with 8MB of QSPI (XiP) flash on board (there's also a budget friendly 2MB version available). The board is designed with castellated pads to allow it to be directly soldered onto a PCB (or you can attach pin headers to hook it up on a breadboard or connect things to it directly with wires). They also managed to fit in a programmable RGB LED, a reset button and some clever circuitry that lets you use the boot button as a user controllable switch.

It's compatible with firmware built for the Raspberry Pi Pico but offers a reduced number of pins due to its size. You can even run MicroPython on it!

Due to popular demand, we've now also got headered Tiny 2040s available, with downwards pointing pin headers lovingly pre-soldered by pirates.

Features

  • Powered by RP2040
  • ARM Cortex M0+ running at up to 133Mhz
  • 264kB of SRAM
  • USB-C connector for power, programming, and data transfer
  • 2MB or 8MB of QSPI flash supporting XiP
  • User controllable RGB LED
  • Twelve IO pins (including four 12-bit ADC channels)
  • Switch for basic input (doubles up as DFU select on boot)
  • On-board 3V3 regulator (max regulator current output 300mA)
  • Input voltage range 3V - 5.5V
  • Dimensions: approx 22.9 x 18.2 x 6mm (L x W x H, including the USB-C port)
  • Eagle CAD part
  • Schematic (8MB)

Getting Started

Tiny 2040 is firmware agnostic! You can program it with C/C++ or MicroPython in the same way as you would a Raspberry Pi Pico, though you'll need to bear in mind that it has a reduced number of pins. You can find (lots) more information on how to do that (as well as download links for the firmware/SDK) on the RP2040 landing page.

You can also use CircuitPython on your Tiny 2040! CircuitPython is an easy to use, well-established ecosystem with lots of example code and drivers for interfacing with different kinds of hardware.

Notes

  • The RGB LED is connected to GP18-GP20 and active low (so the on/off state will work in the opposite way to the LED on a Raspberry Pi Pico). You can PWM the pins to dim the LED - check out Tonygo2's MicroPython example.

Reviews

Verlanglijst Tiny 2040 - 2MB
Productcode: PIM-593
€ 8,22
Excl. BTW
  • 17 stuk(s) direct uit voorraad leverbaar
Bestel deze ook mee

Video

Specificaties

Algemeen
ProductcodePIM-593
MerkPimoroni
EAN0769894020630
MPNPIM593
PlatformRaspberry Pi (RP2040)
Technisch
Bedrijfsspanning3.3 VDC
Ingangsspanning3-5 VDC
Plug AUSB-C
Overig
Afmetingen22.9 x 18.2 x 6mm

Misschien vind je deze ook interessant

Raspberry Pi Pico is het eerste product dat is gemaakt met de RP2040 chip, ontworpen door Raspberry Pi. Het board is te programmeren in MicroPython en C/C++.
€ 3,26 Excl. BTW
De RP2040 van Raspberry Pi in de populaire Feather vormfactor van Adafruit. 8MB flash, onboard LiPo lader, USB-C connector en Stemma QT compatibel.
€ 11,53 Excl. BTW
De Arduino Nano RP2040 Connect brengt de nieuwe Raspberry Pi RP2040 microcontroller naar de Nano vormfactor.
€ 24,75 Excl. BTW
Snelle verzending
Voor 17.00 uur besteld (ma-vr), is zelfde dag verzonden.
Niet goed, geld terug
Bij ons heb je een zichttermijn van 30 dagen.
Wereldwijde verzending
Wij verzenden vanuit Nederland met PostNL en DHL.
Thuiswinkel.org Lid