ODROID-C4

Name: ODROID-C4
Brand: Hardkernel
Price: 66.07 EUR
Availability: OutOfStock

Omschrijving

ODROID-C4 is een nieuwe generatie single board computer die energiezuiniger is en sneller presteert dan de ODROID-C2 die ruim vier jaar geleden werd geïntroduceerd als 's werelds eerste betaalbare ARM 64bit computer.

De hoofd CPU van de ODROID-C4 is opgebouwd uit een quad-core Cortex-A55 cluster met een nieuwe generatie Mali-G31 GPU. De A55 cores draaien op 2.0Ghz zonder thermische throttling met behulp van het standaard koellichaam, waardoor een robuuste en stille computer ontstaat. De CPU multi-core prestaties zijn ongeveer 40% sneller, en de systeem DRAM prestaties zijn 50% sneller dan die van de ODROID-C2. Check de website van Hardkernel voor een overzicht van verschillende benchmarks.

A	CPU (Amlogic S905X3)	H	2 x System LED indicators
B	DDR4 memory (4GiB)	I	1 x UART for system console
C	4 x USB 3.0 host ports	J	1 x IR receiver
D	1 x RJ45 Ethernet port (10/100/1000)	K	40 x GPIO pins
E	1 x HDMI 2.0	L	7 x GPIO pins
F	1 x Micro USB 2.0 port (OTG)	M	1 x eMMC module socket
G	1 x DC power jack (Outer diameter : 5.5mm, inner diameter : 2.1mm)	N	1 x Micro SD slot

Specificaties

Form factor	Board Dimensions: 85mm x 56mm x 1.0mm Heatsink Dimensions: 40mm x 32mm x 10mm Weight: 59g including heatsink
Processor	Amlogic S905X3 12nm Processor L1 instruction cache: 32 KB, 4-way set associative (128 sets), 64 byte lines, shared by 1 processor L1 data cache: 32 KB, 4-way set associative (128 sets), 64 byte lines, shared by 1 processor L3 data cache: 512KB , 16-way set associative (512 sets), 64 byte lines, shared by 4 processors Quad-Core Cortex-A55 (2.016GHz) ARMv8-A architecture with Neon and Crypto extensions Mali-G31 MP2 GPU with 4 x Execution Engines (650Mhz)
Memory	DDR4 4GiB with 32-bit bus width Data rate: 2640 MT/s (PC4-21333 grade) 1.2Volt low power design
Storage	1x eMMC connector (8/16/32/64GiB are available) 1x Micro SD slot (DS/HS mode up to UHS-I SDR104)
Networking	1 x GbE LAN ports (RJ45, supports 10/100/1000 Mbps) Realtek RTL8211F (Ethernet transceiver) LED indicators Green LED: Flashing by data traffic at 100Mbps connection Amber LED: Flashing by data traffic at 1000Mbps connection Optional WiFi USB adapter
Video	1 x HDMI 2.0 (up to 4K@60Hz with HDR, CEC, EDID)
Audio	1 x HDMI digital output 1 x Optional SPDIF optical output
External I/O	4 x USB 3.0 Host ports (shares one single root hub) 1 x USB 2.0 OTG port for Host or Device mode. (No power input) 1 x Debug serial console (UART) 1 x Peripheral Expansion Header (40-pin, 2.54mm pitch) 2x DC 5V, 2x DC 3.3V, 1x DC 1.8V, 8x GND 1x SPI 1x UART 2x I2C 6x PWM 2x ADC input (12bit, 1.8V Max) 25x GPIO (Max) 1x Audio Expansion Header (7-pin, 2.54mm pitch) 1x DC 5V 1x SPDIF out 1x I2S All 3.3V I/O signal level except for ADC input at max 1.8Volt
Other features	IR receiver for remote controller System LEDS Indicators: Red (PWR) – Solid light when DC power is connected Blue (ALIVE) – Flashing like heartbeat while Kernel is running
Power	1 x DC jack : outer (negative) diameter 5.5mm, inner (positive) diameter 2.1mm DC input : 5.5V ~ 13V (*15V/4A PSU is not compatible with C4) DC 12V/2A power adaptor is recommended Power consumption: IDLE : ≃ 1.8W CPU Stress : ≃ 3.64W (Performance governor) Power-off : ≃ 0.14W