micro:bit Motor Driver Expansion Board

micro:bit Motor Driver Expansion Board
micro:bit Motor Driver Expansion Board
micro:bit Motor Driver Expansion Board
micro:bit Motor Driver Expansion Board
micro:bit Motor Driver Expansion Board
micro:bit Motor Driver Expansion Board
micro:bit Motor Driver Expansion Board
micro:bit Motor Driver Expansion Board
micro:bit Motor Driver Expansion Board
micro:bit Motor Driver Expansion Board

Omschrijving

Since the advent of micro:bit, its simple and practical way of programming is widely loved by makers, students and teachers. Its sample design, coupled with a wealth of pin resources, give it infinite possibilities. This expansion board not only leads to 9 micro:bit onboard GPIO interfaces, but also comes with 4-way motor drives and 8 servo interfaces, of which 4-way motor drives can be reused as 2-way stepper motor drives.

Micro:bit Driver Expansion Board adopts IIC external drive chip to control the motor and servo motor, only takes up two IIC pins and can complete the motor and servo dual control without occupying other resources. Using HR8833 motor driver, the maximum continuous operating current is 1.5A, it can drive the ordinary small motor and N20 mini metal motor. Each motor port comes with a positive and negative rotating indicator to identify the motor running direction conveniently, which is very suitable for students and makers to make small projects. Both the extended GPIO and the servo interface use the DFRobot-Gravity standard interface, supporting a large number of modules and sensors. The servo interface is directly connected to the Vin power supply, thus increasing the supply current which can support multiple servos to work at the same time.

This expansion board supports 3.5V to 5.5V power supply. It provides a DC 2.1 plug and a wiring terminal which can be connected directly to three dry battery boxes. It comes with a USB to DC 2.1 adapter cable, which can be powered by power bank and is more economical and environment-friendly.

SPECIFICATION

  • Digital Output Voltage: 0V / 3.3V
  • Analog Output Voltage: 0~3.3V DC
  • Standard Gravity Interface
  • Micro: bit Interface: 9 (P0 P1 P2 P8 P12 P13 P14 P15 P16)
  • Servo Interfaces x 8
  • Motor Interface: DC Motor x 4 / Step Motor x 2
  • Dimension: 63x58mm / 2.48x2.28in

Reviews

Review dit product

Om een review te schrijven moet je inloggen of je eerst registreren
Verlanglijst micro:bit Motor Driver Expansion Board
Productcode: DF-DFR0548
€ 11,95
€ 9,88 Excl. BTW
Dit product is niet op voorraad
  • Verzonden vanaf € 2,95 binnen Nederland
  • Gratis verzending vanaf € 100,00
  • 30 dagen niet goed, geld terug
  • Snelle levering vanuit Nederland

Documentatie

Product wiki

Specificaties

Algemeen
ProductcodeDF-DFR0548
MerkDFRobot
MPNDFR0548
Platformmicro:bit

Misschien vind je deze ook interessant

Pinbetween gives you access to all of the micro:bit's pins at the same time as using an edge-connector add-on
Snelle verzending
Voor 17.00 uur besteld (ma-vr), is zelfde dag verzonden.
Niet goed, geld terug
Niet tevreden? Bij ons heb je een zichttermijn van 30 dagen.
Wereldwijde verzending
We verzenden naar bijna alle landen ter wereld met UPS.