This is the most powerful standard servo sized motor from DFRobot so far. The DF15RSMG equips with two pairs of the servo shells. One is a stardard shell with four M4 mounting holes. And the other one includes a shell with double bearing which is specially designed for the application of the robot arm or the joints.The shells of this kit are thickened to make it stable enough for motion system.
The torque of this motor is about 19kg.cm at 7.4v power supply.Using the Arduino servo library, you could drive this servo motor easily. To reduce the consumption of your microcontroller, this servo has a lock function for the pulse detection. So driving it just requires one PPM controlling signal.
NOTE: This Servo Motor is not a servo which allows you control position or speed, but it is actually a motor with servo appearance, and you can control its rotating direction. You could use servo.h to make the adjustment.
Cable definition
Brown - GND
Red - VCC
Orange - Signal(PPM input wire)
Mechanical specification
Rotation angle range: 360°
No-load speed:60°/0.16s @7.4v
Stall torque:19.3kg.cm(7.4v)
Dynamic torque:15.1kg.cm(7.4v)
Gear:steel,copper mixed gear
Assembly method:fastening with double layer 4 screws
Equip 2 pairs of shells,2 metal servo horns and 2 servo support