Adafruit Gemma M0 - Mini wearable electronic platform

Adafruit Gemma M0 - Mini wearable electronic platform
Adafruit Gemma M0 - Mini wearable electronic platform
Adafruit Gemma M0 - Mini wearable electronic platform
Adafruit Gemma M0 - Mini wearable electronic platform
Adafruit Gemma M0 - Mini wearable electronic platform
Adafruit Gemma M0 - Mini wearable electronic platform
Adafruit Gemma M0 - Mini wearable electronic platform
Adafruit Gemma M0 - Mini wearable electronic platform
Adafruit Gemma M0 - Mini wearable electronic platform
Adafruit Gemma M0 - Mini wearable electronic platform
Adafruit Gemma M0 - Mini wearable electronic platform
Adafruit Gemma M0 - Mini wearable electronic platform

Omschrijving

Het Adafruit Gemma M0 board is een super klein microcontroller board met net genoeg ingebouwde features om een boel simpele projecten te bouwen. Hij ziet er misschien klein en schattig uit maar hij heeft heel veel power! De Gemma M0 heeft de lichtgewicht  ATtiny85 vervangen met het ATSAMD21E18 powerhouse.

Het beste aan de Gemma M0 is dat naast de programmeer mogelijkheden met Arduino IDE, hij voorgeprogrammeerd komt met CircuitPython Wanneer je hem aansluit op de computer is het een heel klein diskje met main.py er op. Pas main.py aan met je favoriete editor om je project te bouwen met Python. Geen installs, IDE of compiler nodig en op elke computer te gebruiken, zelfs ChromeBooks of computers waar je geen software op kan installeren. Wanneer je klaar bent koppel je de Gemma M0 los en neem je je code met je mee.

Hier zijn wat updates waar je alvast naar uit kan kijken:

  • Same size, form-factor, and pinout as classic Gemma
  • Updating ATtiny85 8-bit AVR for ATSAMD21E18 32-bit Cortex M0+
  • 256KB Flash - 8x as much as 8 KB on ATtiny85
  • 32 KB RAM - 64x as much as 512 bytes on ATtiny85
  • 48 MHz 32 bit processor - 6x as fast as ATtiny85 (not even taking into account 32-bit speedups)
  • Native USB supported by every OS - can be used in Arduino or CircuitPython as USB serial console, Keyboard/Mouse HID, even a little disk drive for storing Python scripts. (ATtiny85 does not have native USB)
  • Can be used with Arduino IDE or CircuitPython
  • Built in RGB DotStar LED
  • Three big-hole sew-pads can be used for conductive thread or alligator-clips for fast prototyping
    • Each I/O pad can be used for 12-bit analog input, or digital input/output with internally connected pullups or pulldowns
    • We gave the M0 pads the exact same names as the original Gemma so all your existing Arduino code will work exactly the same as-is without changes
    • True analog output on one I/O pad - can be used to play 10-bit quality audio clips
    • Two high speed PWM outputs on other two I/O Pads - for servos, LEDs, etc
    • All three pads can also be used as hardware capacitive touch sensors with no additional components required
    • Can drive NeoPixels or DotStars on any pins, with enough memory to drive 8000+ pixels. DMA-NeoPixel support on one pin so you can drive pixels without having to spend any processor time on it.
    • Native hardware I2C or Serial available on two pads so you can connect to any I2C or Serial device with true hardware support (no annoying bit-banging)
  • Same Reset switch for starting your project code over
  • On/Off switch built in
  • JST battery connector for plugging in AAA's or LiPoly battery (no built-in LiPoly charging so it is safe to use with NiMH/Alkalines)

Reviews

Verlanglijst Adafruit Gemma M0 - Mini wearable electronic platform
Productcode: ADA-3501
€ 9,88
Excl. BTW
Dit product is niet op voorraad
  • Verzonden vanaf € 8,91 naar Verenigde Staten
  • 30 dagen niet goed, geld terug
  • Snelle levering vanuit Nederland

Documentatie

Adafruit Gemma M0 @ Adafruit Learning System

Specificaties

Algemeen
ProductcodeADA-3501
MerkAdafruit
MPNP3501

Misschien vind je deze ook interessant

Zou je graag meer willen leren over electronica met een alles-in-één board met ingebouwde sensoren en LEDs? Dan is de Circuit Playground iets voor jou. De beste manier om programmeren te oefenen op echte hardware zonder soldering!
€ 19,79 Excl. BTW
Ga aan de slag met Adafruit GEMMA met deze mooie starterkit!
€ 27,69 Excl. BTW
Circuit Playground Bluefruit is Adafruit's third board in the Circuit Playground series, another step towards a perfect introduction to electronics and programming.
€ 24,75 Excl. BTW
Snelle verzending
Voor 17.00 uur besteld (ma-vr), is zelfde dag verzonden.
Niet goed, geld terug
Bij ons heb je een zichttermijn van 30 dagen.
Wereldwijde verzending
Wij verzenden vanuit Nederland met PostNL en DHL.
Thuiswinkel.org Lid