Arduino MKR Relay Proto Shield
Productcode: ARD-TSX00003






Arduino MKR Relay Proto Shield
€ 16,75
Incl. 21% BTW
€ 13,84 Excl. BTW
11 stuk(s) direct uit voorraad leverbaar.
Nu besteld, is vrijdag verzonden.
Nu besteld, is vrijdag verzonden.
Aantal | Korting | Prijs |
10+ | -8% | € 15,42 p/s |
50+ | -12% | € 14,74 p/s |
Omschrijving
he MKR Relay Protoshield allows you to easily add relays to your MKR board based project. The shield provides two relays called RELAY1 and RELAY2 commanded by pin 1 and pin 2 respectively. The shield also provides easy connection by means of screw terminal blocks to A1 to A4 analog inputs, I2C and supply voltages.
- Operating voltage 3.3V (supplied from the host board)
- Two relays with NO, COM and NC connections
- Works with battery powered board
- Screw terminal blocks for easy connections
- Carry current: 2 A
- Max. operating voltage: 125 VAC, 60 VDC
- Max. operating current: 1 A
- Max. switching capacity: 62.50 VA, 30W
Reviews
Misschien vind je deze ook interessant
MKR ZERO has an on-board SD connector with dedicated SPI interfaces (SPI1) that allows you to play with MUSIC files with no extra hardware!Watch o..
Arduino MKR1000 is a powerful board that combines the functionality of the Zero and the Wi-Fi Shield. It is the ideal solution for makers wanting to d..
The MKR Proto Large Shield fits onto your MKR board using its provided female/male headers and enables you to fix it wherever you want with the mounti..
Want to connect several Seeed Studio Grove modules to your Arduino board? The Arduino MKR CONNECTOR CARRIER is the perfect companion for Arduino MKR b..
Need to connect a device to a CAN (Controller Area Network) for communication within an automobile and with other CAN devices? The Arduino MKR CAN shi..