Adafruit Raspberry Pi Zero Behuizing

Adafruit Raspberry Pi Zero Behuizing
Adafruit Raspberry Pi Zero Behuizing
Adafruit Raspberry Pi Zero Behuizing
Adafruit Raspberry Pi Zero Behuizing
Adafruit Raspberry Pi Zero Behuizing
Adafruit Raspberry Pi Zero Behuizing

Omschrijving

This is a basic, classic Pi Zero enclosure with a black base and a clear top. The case is as minimal as it gets, coming in just two pieces of polycarbonate that snap snugly together. This case will keep your Pi Zero safe and secure while also looking super sleek. You can use all of the connectors on the edges of the Pi: mini HDMI, microSD slot, microUSB power, and microUSB port. There's also a cut out to allow a 2x20-pin header to be soldered onto the Pi Zero.

The enclosure was designed by Mike Doell – just like Adafuit's elegant, beautiful, and functional Pi Case for Raspberry Pi Model B. Made of ultra-durable, super-glossy polycarbonate, it is both good looking and tough enough to toss into your pocket, bookbag, or toolbox. It has slim openings for all your cables, an easy-to-access slot for your Micro SD card, slots for your Pi Camera, and a space for your GPIO cable to extend out from the Pi.

The Pi sits nicely in the base, latching to the corner pegs, and the lid fits snugly on top. If you want to break-out your Pi you can simply snap off the GPIO slot and add pHATs, Bonnets, GPIO cables and other accessories with ease.

This enclosure is only compatible with the Raspberry Pi Zero and Pi Zero W! It works with both the Zero v1.2 and v1.3 with camera connector as well as the Wireless Pi Zero W

This product comes with 2 polycarbonate pieces. Raspberry Pi Zero computer is **not** included. No other cables or connectors or accessories are included!

  • Product Dimensions: 70.0mm x 35.0mm x 13.0mm
  • Product Weight: 13.9g / 0.5oz

Reviews

Verlanglijst Adafruit Raspberry Pi Zero Behuizing
Productcode: ADA-3252
€ 4,55
Excl. BTW
  • 149 stuk(s) direct uit voorraad leverbaar
  • Voor 17:00 uur besteld, is vandaag verzonden
  • Verzonden vanaf € 8,91 naar Verenigde Staten
  • 30 dagen niet goed, geld terug
  • Snelle levering vanuit Nederland

Specificaties

Algemeen
ProductcodeADA-3252
MerkAdafruit
MPNP3252
PlatformRaspberry Pi (ARM)
Geschikt voorRaspberry Pi Zero

Misschien vind je deze ook interessant

De Raspberry Pi Zero v1.3 is de kleinste Raspberry Pi computer, zonder WiFi/Bluetooth.
€ 10,70 Excl. BTW
Deze zwart/transparante lasergesneden behuizing bestaat uit 4 lagen helder acrylaat en is geschikt voor alle versies van de Raspberry Pi Zero, inclusief de laatste W versie.
€ 4,92 Excl. BTW
Deze transparante lasergesneden behuizing bestaat uit 4 lagen helder acrylaat en is geschikt voor alle versies van de Raspberry Pi Zero, inclusief de laatste W versie.
€ 4,92 Excl. BTW
Dit is de Joy Bonnet. Adafruit's leukste Bonnet ooit. Deze Bonnet past perfect bovenop je Raspberry Pi Zero (elke soort) en geeft je schattige, hand-held arcade controls. Nadat je Adafruit's script op je Pi hebt geïnstalleerd zullen de controls zich voor
€ 14,83 Excl. BTW
Deze houten lasergesneden behuizing bestaat uit 4 lagen, 2 helder acrylaat en 2 hout, en is geschikt voor alle versies van de Raspberry Pi Zero, inclusief de laatste W versie.
€ 4,92 Excl. BTW
Snelle verzending
Voor 17.00 uur besteld (ma-vr), is zelfde dag verzonden.
Niet goed, geld terug
Bij ons heb je een zichttermijn van 30 dagen.
Wereldwijde verzending
Wij verzenden vanuit Nederland met PostNL en DHL.
Thuiswinkel.org Lid