Adafruit APDS9960 Proximity, Light, RGB, and Gesture Sensor - STEMMA QT / Qwiic

Adafruit APDS9960 Proximity, Light, RGB, and Gesture Sensor - STEMMA QT / Qwiic
Adafruit APDS9960 Proximity, Light, RGB, and Gesture Sensor - STEMMA QT / Qwiic
Adafruit APDS9960 Proximity, Light, RGB, and Gesture Sensor - STEMMA QT / Qwiic
Adafruit APDS9960 Proximity, Light, RGB, and Gesture Sensor - STEMMA QT / Qwiic
Adafruit APDS9960 Proximity, Light, RGB, and Gesture Sensor - STEMMA QT / Qwiic
Adafruit APDS9960 Proximity, Light, RGB, and Gesture Sensor - STEMMA QT / Qwiic

Omschrijving

This breakout is chock full o' sensors! Add basic gesture sensing, RGB color sensing, proximity sensing, or ambient light sensing to your project with the Adafruit APDS9960 Proximity, Light, RGB, and Gesture Sensor. When connected to your microcontroller (running our library code) it can detect simple gestures (left to right, right to left, up to down, down to up are currently supported), return the amount of red, blue, green, and clear light, or return how close an object is to the front of the sensor. This device uses an I2C interface so it's easy to wire up and use.

The APDS9960 from Avago Technologies has an integrated IR LED and driver, along with four directional photodiodes that sense reflected IR energy from the LED. Its proximity detection feature allows it to measure the distance an object is from the front of the sensor (up to a few centimeters) with 8-bit resolution.

Since there are four IR sensors, you can measure the changes in light reflectance at each of the cardinal locations over time and turn those changes into gestures. Our interface library can detect directional gestures (left to right, right to left, up to down, down to up), but in theory more complicated gestures like zig-zag, clockwise or counterclockwise circle, near to far, etc. could also be detected with additional code.

The APDS9960 has a configurable interrupt that can fire when a certain proximity threshold is broken, or when a color sensor breaks a certain threshold.

For your convenience, we've pick-and-placed the sensor on a PCB with a 3.3V regulator and some level shifting so it can be easily used with your favorite 3.3V or 5V microcontroller.

Reviews

Verlanglijst Adafruit APDS9960 Proximity, Light, RGB, and Gesture Sensor - STEMMA QT / Qwiic
Productcode: ADA-3595
€ 7,40
Excl. BTW
  • 9 stuk(s) direct uit voorraad leverbaar
  • Voor 17:00 uur besteld, is vandaag verzonden
  • Verzonden vanaf € 8,91 naar Verenigde Staten
  • 30 dagen niet goed, geld terug
  • Snelle levering vanuit Nederland

Documentatie

Adafruit APDS9960 breakout @ Adafruit Learning System

Specificaties

Algemeen
ProductcodeADA-3595
MerkAdafruit
MPNP3595
PlatformSTEMMA
qwiic

Misschien vind je deze ook interessant

De lichtsensor TSL2591 is een geavanceerde digitale lichtsensor, ideaal voor gebruik in een breed scala van lichtsituaties.
€ 6,82 Excl. BTW
Deze 4-aderige kabel is iets meer dan 100 mm lang en voorzien van JST-SH vrouwelijke 4-pins connectoren aan beide uiteinden
€ 1,03 Excl. BTW
Deze 4-aderige kabel is iets meer dan 150 mm lang en uitgerust met JST-SH vrouwelijke 4-pins connectoren aan het ene uiteinde en premium Dupont mannelijke headers aan het andere.
€ 1,03 Excl. BTW
Deze 4-aderige kabel is 150 mm lang en voorzien van JST-SH vrouwelijke 4-pins connectors aan de ene kant en premium vrouwelijke headers aan de andere kant.
€ 1,03 Excl. BTW
Deze 4-aderige kabel is iets meer dan 200mm lang en voorzien van JST-SH vrouwelijke 4-pins connectoren aan beide uiteinden.
€ 1,24 Excl. BTW
Snelle verzending
Voor 17.00 uur besteld (ma-vr), is zelfde dag verzonden.
Niet goed, geld terug
Bij ons heb je een zichttermijn van 30 dagen.
Wereldwijde verzending
Wij verzenden vanuit Nederland met PostNL en DHL.
Thuiswinkel.org Lid