Your shopping cart is empty
WiFi / Wireless
This antenna is about 220mm long from tip to tip and with a cable thickness of 0.8mm, its for 2.4GHz WiFi or BLE with a 4dBi gain.
The ESP32-S2 is a highly-integrated, low-power, 2.4 GHz Wi-Fi System-on-Chip (SoC) solution that now has built-in native USB.
This 100mm long flexible uFL 2.4GHz antenna has approx 4DBi gain and a 50Ω impedance.
With this cable you can connect SMA or RP-SMA antennas to a MHF3/ IPEX3 / wFL / w.FL connector.
The Arduino MKR WiFi 1010 is the easiest point of entry to basic IoT and pico-network application design.
This is the assembled Adafruit HUZZAH ESP8266 Feather with built-in USB and battery charging function.
The Argon40 CC2562P Zigbee Module is a powerful wireless communication module.
The Arduino UNO WiFi Rev.2 is the easiest point of entry to basic IoT with the standard form factor of the UNO family.
The e-Paper ESP32 Driver Board is a wireless solution for refreshing e-Paper display content.
UartSBee v5' is FTDI cable compatible USB to Serial adapter equipped with BEE socket (20pin 2.0mm).
SP108E WiFi Pixel LED Controller for RGB and RGBW strips. App controlled, 100+ effects, supports multiple protocols, up to 2048 pixels.
USB Zigbee 3.0 dongle for Home Assistant and Zigbee2MQTT. Reliable, compact, and supports a wide range of Zigbee devices.