Transcend M.2 NVMe SSD - 512GB

PLEASE NOTE: These SSDs do NOT work with Home Assistant, a solution is being worked on!

This 512GB NVMe M.2 2280 SSD fits systems with an M.2 Key M NVMe slot, including Raspberry Pi 5 with an NVMe HAT/base that supports 2280, Raspberry Pi Compute Module carriers with Key M 2280, and Jetson carrier boards with Key M 2280. Not compatible with Arduino or micro:bit boards without PCIe/NVMe support.

Use the SSD as fast system storage for workloads such as machine vision, data logging and edge applications. PCIe 3.0 x4 and NVMe 1.3 deliver short boot times and high throughput.

Installation requires a free M.2 Key M 2280 slot. Check enclosure clearance for double-sided modules.

Features

• PCIe 3.0 x4 and NVMe 1.3 for high throughput
• 3D TLC NAND with DRAM cache and SLC caching
• Advanced LDPC ECC for data integrity
• 2280 form factor for Pi 5 (with NVMe HAT), CM carriers and Jetson carriers
• Dynamic thermal throttling for sustained performance

Specifications

• Capacity: 512GB
• Form factor: M.2 2280, 80 x 22 x 3.58 mm
• Interface: PCIe 3.0 x4, NVMe 1.3 (M-key)
• NAND type: 3D TLC, controller with DRAM cache
• Sequential performance: up to 3500 MB/s read, 2800 MB/s write*
• Operating temperature: 0 °C to 70 °C
• Voltage: 3.3V
• *Performance depends on system and workload

Please note! Not suitable for use with the Argon ONE V3 and Neo 5! This SSD is populated on two sides making it too thick for these expansion boards. Does fit on the N04 M.2 2280 PCIe to NVMe Top Expansion and NVMe Base for Raspberry Pi 5.