DC Lab Power Supply with LCD Display - 0-30 VDC / 0-10 A

This device is a highly accurate, DC-regulated power supply with an adjustable output. This output can be used for constant voltage (C.V.) and constant current (C.C.).

The output voltage can be adjusted between 0V and 30V when the device is in the constant voltage mode or C.V.-mode. The current-limiting point (max. ± 12 A) can also be set arbitrarily in this mode. The output current can be adjusted continuously between 0 and 10 A in the constant current mode. The output current and voltage are indicated through LED displays.

Features

• switching power supply
• LCD display for voltage and current
• protection mode: current limiting
• colour: grey - dark grey
• output connectors: IEC1010
• protected by fuse

Specifications

• Display type: LCD
• Fuse type: T 5 A (slow blow)
• Power factor: 0.60
• Output current value: 0-10 A
• Peak-to-peak ripple voltage: ≤ 100 mV
• Output connector type: IEC 1010
• Protection: Current limiting
• Pollution degree: 2
• Number of current outputs: 1
• Number of voltage outputs: 1
• Operating temperature: 0-40 °C
• Operating languages: Dutch, English, French, German, Polish, Portuguese, Spanish
• Maximum working height: 2000 m
• Maximum relative humidity: < 90 %.
• IEC Connection: C13, C14
• Mains plug type: Type E/F (France/Germany)
• Input frequency: 50 Hz
• Power consumption: 420 W
• Input voltage VAC: 230 V
• Output voltage VDC: 0-30 V
• Input current VAC: 2.4 A