Your shopping cart is empty
Smart Cutebot Pro
Description
ELECFREAKS micro:bit Smart Cutebot Pro Robot Car Kit is a programmable robot for STEAM education, it's equiped with a 4-way infrared line-following sensor, encoder motors, a rainbow LED light, an ultrasonic distance sensor, and more. With the new encoder motors, Cutebot Pro provides the flexibility to control the distance the robot travels and enables more precise control of the turning angle. Cutebot Pro also offers a variety of expansion interfaces to allow for additional hardware to stimulate children's imagination and creativity.
Highlights
- Closed-loop motor for more precise driving
Cutebot Pro comes with closed-loop motors. In comparison to the standard motors on the regular Cutebot, closed-loop motors have sensors that provide feedback to regulate the input. This way you can position and turn more precisely than with a standard DC motor. - 4 line-tracking sensors to identify more complex lines
Cutebot Pro is upgraded to 4 line-tracking sensors, which can identify more complex intersections such as crossroads or T-junctions. 4 line-tracking sensor data can be fused into one line of analog data to realize PID line inspection. At the same time, it can also combine many sensors and building blocks to realize more application scenarios. - More versatile with a lithium battery
The newly upgraded Cutebot Pro no longer needs a lithium battery expansion pack. It works with a single 18650 lithium battery(NOT included) which can be charged directly from the robot. - Can be expanded with more sensors and structural parts
Cutebot Pro adds an additional motor expansion interface, and more holes for structural parts to add an arm, for example.
Product comparison
| Product | Cutebot | Maqueen Plus V2 | Cutebot Pro |
|---|---|---|---|
| Motors | Standard DC | Standard DC | Closed-loop (encoder) |
| Line-tracking | Two-way | Five-way | Four-way |
| Dimensions | 85.68mm x 85.34mm | 136mm x 65mm | 132mm x 115mm |
| Programming support | MakeCode / Python | MakeCode / Mind+ | MakeCode / Python |
| Battery | 3x AAA | 1x 18650 Lithium | 1x 18650 Lithium |
| Servo interface | 2 | 3 | 4 |
| Extra motor interface | 0 | 0 | 1 |
| Infrared received | 1 | 1 | 1 |
Specifications
- Power supply: 18650 lithium battery
- Charging current: 1000mA
- Max. operating voltage: 4.2V
- Rated operating voltage: 3.7V
- Min. operating voltage: 3.3V
- Motor output voltage: 3.3V
- Max. output current for motors: 0.2A
- Servo output voltage: Current battery voltage
- Max. output current for servos: 3A
- Output voltage for IO ports: 3.3V
- Max. output current for IO ports: 3A
- Onboard devices:
- 2x Rainbow (RGB LED) light
- 2x Headlight
- 1x Buzzer
- 1x Infrared receiver
- 4x Infrared line following sensor
- 4x Servo connector
- 1x Motor connector
- 4x GPIO connector
- 2x I2C port
Reviews
Smart Cutebot Pro
Product Code: EF-08292
€ 44.99
Ex. VAT
10 or more € 42.74 Ea. (-5%)
6 piece(s) in stock
Specifications
You might like these as well
The micro:Maqueen Plus V2 is an improved version of the original micro:Maqueen Plus for the micro:bit.
The Smart Cutebot micro:bit Robot Kit is a rear wheel drive smart car driven by two high-speed motors.
Build and program 32 creative projects with over 400 building blocks, sensors, and an expansion board for the micro:bit.
The LG INR18650-MH1 is a high-performance 18650 Li-ion battery with a 3200mAh capacity and a 10A continuous discharge rate.
dd precise line following to your autonomous buggy builds with the Kitronik Autonomous Robotics Platform Line Follower Board.