Seeed Studio XIAO ESP32C3

Seeed Studio XIAO ESP32C3 is built around the 32-bit ESP32-C3 RISC-V chip processor with a four-stage pipeline that operates at up to 160 MHz.

The board equips highly-integrated ESP32-C3 SoC. The chip has been installed with a complete 2.4GHz Wi-Fi subsystem which means it supports Station mode, SoftAP mode, SoftAP & Station mode, and promiscuous mode for multiple Wi-Fi applications. It works under an ultra-low power state, also supporting features of Bluetooth 5 and Bluetooth mesh. There are 400 KB SRAM & 4 MB Flash on the chip, allowing for more programming space, and bringing more possibilities to the IoT control scenarios.

Features

• Incorporates the ESP32-C3 32-bit RISC-V chip, operating up to 160 MHz, mounted multiple development ports, supported by Arduino / CircuitPython
• Implements complete Wi-Fi functions and Bluetooth Low Energy, while supporting communication over 100m with a U.FL antenna
• Provides 4 working modes as low as 44 μA in deep sleep mode, while supporting lithium battery charge management
• Only 21 x 17.5mm is size, Seeed Studio XIAO series classic form factor, suitable for wearable devices
• Perfect for Production: Breadboard & SMD friendly design, no components on the back

Specifications