Search - Tag - 6mm

This is a 32x16 RGB LED Matrix Panel, it has 512 full-color RGB LEDs in all. Each LED can be independently addressed and controlled. It requires at least 13 digital GPIOs to control the LED matrix. The led matrix has 2 IDC connectors (DATA_IN, DATA_OUT) on the back, you can cascade multiple panels a..

Rugged Metal Pushbutton - 16mm 6V RGB MomentaryTechnical detailsDrill hole diameter: 16mm Switch current: not rated, we recommend no more than 1A / 24VDC Switch contacts: 1 set normally open Material: Chrome plated brass Contact resistance: a 50 mOhm Insulation resistance: > ..

Simple normally-open momentary pushbutton without a LED.Easily connect these buttons with 2.8mm quick connect wires...

Simple normally-open momentary pushbutton without a LED.Easily connect these buttons with 2.8mm quick connect wires...

Simple normally-open momentary pushbutton without a LED.Easily connect these buttons with 2.8mm quick connect wires...

Simple normally-open momentary pushbutton without a LED.Easily connect these buttons with 2.8mm quick connect wires...

This push button is made of black plastic with the LED built in. There are two contacts for the LED (marked + and -) and two contacts for the button. The forward voltage is about 3V so a 220 to 1000 ohm resistor is recommended if you are using a power source of 3V or higher.This particular butto..

This push button is made of black plastic with the LED built in. There are two contacts for the LED (marked + and -) and two contacts for the button. The forward voltage is about 3V so a 220 to 1000 ohm resistor is recommended if you are using a power source of 3V or higher.This particular butto..

This push button is made of black plastic with the LED built in. There are two contacts for the LED (marked + and -) and two contacts for the button. The forward voltage is about 2V so a 220 to 1000 ohm resistor is recommended if you are using a power source of 3V or higher.This particular butto..

This push button is made of black plastic with the LED built in. There are two contacts for the LED (marked + and -) and two contacts for the button. The forward voltage is about 3V so a 220 to 1000 ohm resistor is recommended if you are using a power source of 3V or higher.This particular butto..

This push button is made of black plastic with the LED built in. There are two contacts for the LED (marked + and -) and two contacts for the button. The forward voltage is about 2.1V so a 220 to 1000 ohm resistor is recommended if you are using a power source of 3V or higher.This particular but..

This push button is made of black plastic with the LED built in. There are two contacts for the LED (marked + and -) and two contacts for the button. The forward voltage is about 3V so a 220 to 1000 ohm resistor is recommended if you are using a power source of 3V or higher.This particular butto..