Raspberry Pi PoE+ Injector

The Raspberry Pi PoE+ Injector adds Power-over-Ethernet (PoE) functionality to a single port of a non-PoE Ethernet switch, delivering both power and data through a single Ethernet cable. It offers a plug-and-play, cost-effective way to incrementally introduce PoE power delivery capability into pre-existing Ethernet networks.

The PoE+ Injector is a single-port 30W injector suitable for powering devices that conform to the IEEE 802.3af and 802.3at specifications, including all generations of Raspberry Pi PoE HAT. It supports network pass-through at 10/100/1000 Mbps speeds. A separate IEC C13 mains lead is required for operation (not included).

Specifications

• Data rate: 10/100/1000 Mbps
• Input voltage: 100 to 240 V AC
• Output power: 30W
• Power output on pins: 4/5 (+), 7/8 (–)
• Nominal output voltage: 55 V DC
• Dimensions: 159 mm (L) × 51.8 mm (W)  × 33.5 mm (H)
• Data connectors: Shielded RJ-45, EIA 568A and 568B
• Power connector: IEC c13 mains power input (not included)
• Operating ambient temperature: –10⁰C to +50⁰C
• Operating humidity: Maximum 90%, non-condensing
• Storage temperature: –20⁰C to +70⁰C
• Storage humidity: Maximum 95%, non-condensing
• Operating altitude: –300m to 3000m
• MTBF: 200,000 hrs @ 25⁰C