PCIe 2.0 to dual M.2 HAT for Raspberry Pi 5

PCIe 2.0 to M.2 hat designed for Raspberry Pi 5. Supports PCIe Gen2 x1 and PCIe Gen3 x1 speed work with 2230/2242/2260/2280 NVMe SSD. Support Hailo8/8L and Google Coral AI accelerators.

Features

• PCle2.0 Dual Channel: It supports the use of both NVMe SSDs and Hailo AI acceleration cards at the same time. Or you can choose to expand two NVMe SSD to bring massive storage capacity to your Raspberry Pi5. This hat utilizes the PCIe 2.0 switch chip ASM1182E, which has good compatibility with Raspberry Pi 5.
• Stable Connection: Additional Pogo Pins for extra power supply to ensure a stable high-speed connection.
• Multiple size support: 2230/2242/2260/2280 compatible.
• Back-mounted design: This hat features a back-mounted design, allowing users to freely use the 40-pin GPIO and can be used in conjunction with other hats. Additionally, it does not obstruct official Raspberry Pi heatsinks and fans, providing better airflow and cooling efficiency.
• User-friendly Design: S-shaped FPC cable design that does not obstruct the micro SD card.

Due to compatibility issues with Raspberry Pi's PCIe, not all NVMe SSDs are supported. Raspberry Pi's official developers are continuously updating the system to support more NVMe SSD controllers and models. Especially if booting from an SSD is required, we strongly recommend updating to the latest Raspberry Pi firmware and bootloader. 

Assembly

For detailed instructions, please refer to the Seeed wiki.