The wide-angle Raspberry Pi Camera Module 3 is a compact camera from Raspberry Pi with a 102 degrees field of view. It offers an IMX708 12-megapixel sensor with HDR, and features phase detection autofocus.
Camera Module 3 is available in standard and wide-angle variants, both of which are available with or without an infrared cut filter:
Camera Module 3 can be used to take full HD video as well as stills photographs, and features an HDR mode up to 3 megapixels. Its operation is fully supported by the libcamera library, including Camera Module 3’s rapid autofocus feature: this makes it easy for beginners to use, while offering plenty for advanced users. Camera Module 3 is compatible with all Raspberry Pi computers.
The PCB size and mounting holes remain the same as for Camera Module 2. The Z dimension differs: due to the improved optics, Camera Module 3 is several millimetres taller than Camera Module 2.
The camera works with all Raspberry Pi models, only for use with a Raspberry Pi 5 or Raspberry Pi Zero you will need an adapter cable.
Features
Back-illuminated and stacked CMOS 12-megapixel image sensor (Sony IMX708)
High signal-to-noise ratio (SNR)
Built-in 2D Dynamic Defect Pixel Correction (DPC)
Phase Detection Autofocus (PDAF) for rapid autofocus
QBC Re-mosaic function
HDR mode (up to 3 megapixel output)
CSI-2 serial data output
2-wire serial communication (supports I2C fast mode and fast-mode plus)
2-wire serial control of focus mechanism
Lens Characteristics
Focus range: 5cm - ∞
Focal length: 2.75mm
Diagonal field of view: 120 degrees
Horizontal field of view: 102 degrees
Vertical field of view: 67 degrees
Focal ratio (F-stop): F2.2
Infrared-sensitive: No
Specifications
Sensor: Sony IMX708
Resolution: 11.9 megapixels
Sensor size: 7.4mm sensor diagonal
Pixel size: 1.4μm × 1.4μm
Horizontal/vertical: 4608 × 2592 pixels
Common video modes: 1080p50, 720p100, 480p120
Output: RAW10
IR cut filter: Integrated in standard variants; not present in NoIR variants
Compliance: FCC 47 CFR Part 15, Subpart B, Class B Digital Device Electromagnetic Compatibility Directive (EMC) 2014/30/EU. Restriction of Hazardous Substances (RoHS) Directive 2011/65/EU
Production lifetime: Raspberry Pi Camera Module 3 will remain in production until at least January 2030
Make sure you are using that latest version of Raspberry Pi OS, and that it is completely up to date. Otherwise, the camera module will not be recognized.
De Raspberry Pi Camera Module 2 is gebaseerd op de 8 megapixel Sony IMX219 beeldsensor van hoge kwaliteit voor Raspberry Pi, met een lens met vaste focus.
The Raspberry Pi NoIR Camera Module v2 is a high quality 8 megapixel Sony IMX219 image sensor add-on board for Raspberry Pi, featuring a fixed focus lens.