This colour coded 2x20 male header is a great way to add pins to your Raspberry Pi Zero. The colour-coded GPIO pins make locating that ground or power connection you need super simple!The colour coding is nice and simple:
Red = 5V
Yellow = 3V3
Black = GND
Blue = DNC (Reversed I2C)Be..
Make your Raspberry Pi seriously cool with Fan SHIM! This 30mm no-solder, controllable CPU fan with RGB LED and tactile switch will give your Raspberry Pi significantly better thermal performance.Fan SHIM uses a friction-fit header, so it just slips onto your Pi's pins and it&..
Use this screw terminal HAT to convent your Raspberry Pi GPIO pins into screw terminals. All the used pins will light up on the board next to the handy pinout, and the indicators are in five different colours.Compatible with all Raspberry Pi models equipped with a 40-pin header.Part List..
A conveniently sized, labelled proto-board add-on for your Raspberry Pi Pico, perfect for permanently attaching your custom circuits.With a 6x20 grid of 2.54mm spaced holes for easy soldering and labelled Pico pins so you know what's what, Pico Proto is perfect for when you're happy with..
Add storage and Wifi (2.4GHz) to your Raspberry Pi Pico with the Pico Wireless Pack from Pimoroni.The board includes an SD slot for local storage, an ESP32-WROOM-32E chip for wireless communication, an RBD LED to provide status updates, and a programmable push button. The board is shipped fully ..
Pogo-a-go-go Solderless GPIO Pogo PinsFit a pHAT fiddle-free! These solderless pogo GPIO pins, nuts, bolts, and spacers make fitting a pHAT to your Pi Zero (or Zero W) super-quick and easy. Pogo-a-go-go!Pogo pins are springy and normally used for test jigs (we use them for this in the..
Make the most of the fuctionality of the Pi 400 GPIO pins with this dual GPIO extension. With this extension board of 2 x 40 pins, they are a lot easier to use and also color coded.Also available with 1 x 40 pins...
Use this little GPIO header in combination with a 40-pin stacking header to use the Raspberry Pi PoE HAT with another addon board. This header goes on the 4-pin header of the Raspberry Pi.Suitable for the Raspberry Pi 3B+ and 4B...
This ribbon cable can be plugged easily onto the GPIO header of your Raspberry Pi. One side has a 4-way IDC connector while the other side ends with single Dupont-style female sockets.Cable length is 20cm. 28AWG wire...