Raspberry Pi 4 Model B Basic Pack - Black/Grey - 4GB

The Raspberry Pi 4 Basic Pack 4GB is the ideal package to get a quick start with your new Pi 4. Place your Pi in the official case, insert your pre-installed MicroSD card into the slot, connect one or two (extra Micro HDMI cable required) screens and other peripherals (such as a mouse and/or keyboard) and power up your Pi. After adding some local data you're ready to go!

This basic pack consists of the following parts:

• A Raspberry Pi 4 Model B v1.2 - 4GB
• The official black and grey case
• The official black 5.1V/3A USB-C power supply (EU plug only)
• A black micro-HDMI to HDMI cable of one meter
• A microSD card of 16GB with Raspberry PiOS pre-installed

We also have a basic pack with the Raspberry Pi 4 Model B - 2GB.

Differences between the Pi 3 Model B+ and the Pi 4 Model B

All specifications of the Raspberry Pi 4 Model B

• Processor:
  • Broadcom BCM2711, quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
• Memory:
  • 2GB or 4GB LPDDR4 (depending on model)
• Connectivity:
  • 2.4 GHz and 5.0 GHz IEEE 802.11b/g/n/ac wireless LAN, Bluetooth 5.0, BLE
  • Gigabit Ethernet
  • 2 USB 3.0 ports
  • 2 USB 2.0 ports
• GPIO:                                            
  • Standard 40-pin GPIO header (fully backwards-compatible with previous boards)
• Video and sound:
  • 2 × micro HDMI ports (up to 4Kp60 supported)
  • 2-lane MIPI DSI display port
  • 2-lane MIPI CSI camera port
  • 4-pole stereo audio and composite video port
• Multimedia:
  • H.265 (4Kp60 decode);
  • H.264 (1080p60 decode, 1080p30 encode);
  • OpenGL ES, 3.0 graphics
• Input power:
  • 5V DC via USB-C connector (minimum 3A)
  • 5V DC via GPIO header (minimum 3A)
  • Power over Ethernet (PoE)–enabled (requires separate PoE HAT)
• Environment:
  • Operating temperature 0–50ºC