The official Raspberry Pi Micro USB Power Supply with EU-plug is designed to power any Raspberry Pi computer that features a micro USB connector. The USB cable is fixed.
Output
Output voltage: +5.1V DC
Minimum load current: 0.0A
Nominal load current: 2.5A
Maximum power: 12.5W
Load regulation: ±5%
Line regulation: ±2%
Ripple & noise: 120mVp-p
Rise time: 100ms maximum to regulation limits for DC outputs
Turn-on delay: 3000ms maximum at nominal input AC voltage and full load
Protection: Short circuit protection, overcurrent protection
Efficiency: 80.73% minimum (output current from 100%, 75%, 50%, 25%)
Output cable: 1.5m 18AWG, fixed
Output connector: micro USB
Input
Voltage range: 100–240Vac (rated), 96–264Vac (operating)
Frequency: 50/60Hz ±3Hz
Current: 0.5A maximum
Power consumption (no load): 0.075W maximum
Inrush current: No damage shall occur and the input fuse shall not blow
Environment
Operating ambient temperature 0–40°C
Compliance
For a full list of local and regional product approvals, please visit pip.raspberrypi.com
Not suitable for Raspberry Pi boards with USB-C power connector.
This is the smallest Raspberry Pi available at the moment, now with the GPIO-header presoldered. The board is just half the size of a Raspberry Pi Model A+, but with more capabilities!