The 7" Touchscreen Monitor for Raspberry Pi gives users the ability to create all-in-one, integrated projects such as tablets, infotainment systems and embedded projects. The 800 x 480 display connects via an adapter board which handles power and signal conversion. Only two connections to the P..
Get up and running quickly with this 16GB microSD card with the latest version of Raspberry Pi OS pre-installed.Comes in a jewelcase with a microSD to SD adapter included.Compatible with all Raspberry Pi's.Specifications:Release date: April 4th 2022
This colour coded 2x20 male header is a great way to add pins to your Raspberry Pi Zero. The colour-coded GPIO pins make locating that ground or power connection you need super simple!The colour coding is nice and simple:
Red = 5V
Yellow = 3V3
Black = GND
Blue = DNC (Reversed I2C)Be..
This is a 300x Microscope Lens which is suitable to use with the Raspberry Pi High Quality Camera. It has a high level of zoom and can be used for macroscopic applications. t has an adjustment magnification ring whoch supports magnification up to 300x. The lens can be easily screwed into t..
Get up and running quickly with this 32GB microSD card with the latest version of Raspberry Pi OS pre-installed.Comes in a jewelcase with a microSD to SD adapter included.Compatible with all Raspberry Pi's...
This is a 50mm 8MP Telephoto Lens which is suitable to use with the Raspberry Pi High Quality Camera. It has a narrow angle of view suitable for viewing subjects located far away. It has an adjustable aperture ring from F1.4. The lens can be easily screwed into the Raspberry Pi H..
Get up and running quickly with this Panasonic A1 64GB microSD card with the latest version of Raspberry Pi OS pre-installed.Comes in a jewelcase with a microSD to SD adapter included.Compatible with the Raspberry Pi 1 and Raspberry Pi Zero(ARMv6), Raspberry Pi 2 (ARMv7) and Raspberry Pi 3 a..
This 5V cooling fan with a blue LED runs smoothly and quietly and it’s good for heat dissipation of the Raspberry Pi. Screws for assembly are included.IncludedCooling Fan
Screw SetDimensions: 30x30x7.8mm..
The Raspberry Pi 4 Case Fan is an official accessory for Raspberry Pi 4, for use with the official Raspberry Pi 4 Case. Designed for over-clockers and other power users, it keeps your Raspberry Pi 4 at a comfortable operating temperature even under heavy load.FeaturesFits perfectly into t..
Make your Raspberry Pi seriously cool with Fan SHIM! This 30mm no-solder, controllable CPU fan with RGB LED and tactile switch will give your Raspberry Pi significantly better thermal performance.Fan SHIM uses a friction-fit header, so it just slips onto your Pi's pins and it&..
Keep your new Raspberry Pi 4 cool with this heat sink. The Raspberry Pi 4 runs a lot hotter than the previous versions, so extra cooling is welcome!This cooling block ensures that the heat dissipation goes much better. Keep in mind that your case does need sufficient ventilation holes. In the of..
Add this beautiful ICE Cooling Tower to your Raspberry Pi 3 or 4, and the core temperature will be at a steady 40 degrees!FeaturesSupport Raspberry Pi 4B/3B+/3B
DC 5V Power in (powered by the Raspberry Pi)
ICE Tower Structure
5mm copper tube
Great heat dissipation