The Raspberry Pi 4 Basic Pack 4GB is the ideal package to get a quick start with your new Pi 4. Place your Pi in the official case, insert your pre-installed MicroSD card into the slot, connect one or two (extra Micro HDMI cable required) screens and other peripherals(such as a mouse and/or keyboard) and power up your Pi. After adding some local data you're ready to go!
This basic pack consists of the following parts:
We also have a basic pack with the Raspberry Pi 4 Model B - 2GB.
Differences between the Pi 3 Model B+ and the Pi 4 Model B
| | Pi Model 3 B+ | Pi 4 Model B |
| Processor | Broadcom BCM2837B0, Quad-core Cortex-A53 64-bit SoC@ 1.4GHz | Broadcom 2711, Quad-core Cortex-A72 64-bit SoC @ 1.5GHz |
| Memory | 1GB LPDDR2 SDRAM | 2GB or 4GB LPDDR4 SDRAM |
| Connectivity | 2.4GHz / 5.0GHz IEEE 802.11.b/g/n/ac wireless LAN
Bluetooth 4.2, BLE
4 x USB 2.0 ports
Gigabit Ethernet over USB2.0 (max. 300Mbps) | 2.4GHz / 5.0GHz IEEE 802.11.b/g/n/ac wireless LAN
Bluetooth 5.0, BLE
2 x USB 2.0 / 2 x USB 3.0 ports
True Gigabit Ethernet |
| Video | 1 x full size HDMI | 2 x micro HDMI, 4K video |
| Multimedia | H.264, MPEG-4 decode (1080p30)
H.264 encode (1080p30)
OpenGL ES 1.1, 2.0 graphics | H.265 decode (4kp60)
H.264 decode (1080p60)
H.264 encode(1080p30)
OpenGL ES 1.1, 2.0, 3.0 graphics |
| Input Power | 5V/2.5A DC via micro USB connector | 5V/3A DC via USB type C connector |
All specifications of the Raspberry Pi 4 Model B
- Processor:
- Broadcom BCM2711, quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
- Memory:
- 2GB or 4GB LPDDR4 (depending on model)
- Connectivity:
- 2.4 GHz and 5.0 GHz IEEE 802.11b/g/n/ac wireless LAN, Bluetooth 5.0, BLE
- Gigabit Ethernet
- 2 USB 3.0 ports
- 2 USB 2.0 ports
- GPIO:
- Standard 40-pin GPIO header (fully backwards-compatible with previous boards)
- Video and sound:
- 2 × micro HDMI ports (up to 4Kp60 supported)
- 2-lane MIPI DSI display port
- 2-lane MIPI CSI camera port
- 4-pole stereo audio and composite video port
- Multimedia:
- H.265 (4Kp60 decode);
- H.264 (1080p60 decode, 1080p30 encode);
- OpenGL ES, 3.0 graphics
- Input power:
- 5V DC via USB-C connector (minimum 3A)
- 5V DC via GPIO header (minimum 3A)
- Power over Ethernet (PoE)–enabled (requires separate PoE HAT)
- Environment:
- Operating temperature 0–50ºC
