Menu
Your cart

Prototyping

24-Pin 8x3 Male Header - Angle
Out Of Stock
Product Code: KW-1987
A 24 pin (8 pins per row x 3 row) right angle connector.  Suitable for connecting RC servos to the Servo Pi board or to use with the ADC Differential Pi...
In Stock: In Stock Product Code: KW-2639
This colour coded 2x20 male header is a great way to add pins to your Raspberry Pi Zero. The colour-coded GPIO pins make locating that ground or power connection you need super simple!The colour coding is nice and simple: Red = 5V Yellow = 3V3 Black = GND Blue = DNC (Reversed I2C)Be..
In Stock: In Stock Product Code: KW-2828
A 1x40 pin header strip with a 2.54mm pitch. The pins 18mm are high/tall...
In Stock: In Stock Product Code: KW-2636
Use this circuit board for your prototypes. A 3x7cm, double-sided prototyping board with a 2.54mm (0.1") pitch.SpecificationsDimensions: 30x70mm Thickness: 1.6mm Pitch: 2.54mm (0.1")..
In Stock: In Stock Product Code: KW-2249
This prototyping board is 4x6cm in size and 1.2mm thick...
In Stock: In Stock Product Code: KW-2635
Use this circuit board for your prototypes. A 5x7cm, double-sided prototyping board with a 2.54mm (0.1") pitch.SpecificationsDimensions: 50x70mm Thickness: 1.6mm Pitch: 2.54mm (0.1")..
In Stock: In Stock Product Code: KW-2634
Use this circuit board for your prototypes. A 6x8cm, double-sided prototyping board with a 2.54mm (0.1") pitch.SpecificationsDimensions: 60x80mm Thickness: 1.6mm Pitch: 2.54mm (0.1")..
In Stock: In Stock Product Code: KW-2633
Use this circuit board for your prototypes. A 7x9cm, double-sided prototyping board with a 2.54mm (0.1") pitch.SpecificationsDimensions: 70x90mm Thickness: 1.6mm Pitch: 2.54mm (0.1")..
In Stock: In Stock Product Code: KW-2632
Use this circuit board for your prototypes. A 8x12cm, double-sided prototyping board with a 2.54mm (0.1") pitch.SpecificationsDimensions: 80x120mm Thickness: 1.6mm Pitch: 2.54mm (0.1")..
In Stock: In Stock Product Code: KW-2308
Use these Quick Connect wires to wire buttons easily without soldering. The connectors are suitable for tabs up to 2.8mm wide. They also fit on 2mm tabs if clamped properly.One set of wires is made up of two wires with tab connectors on one side, and a single 2-way 2.54mm JST-XH connector on the..
In Stock: In Stock Product Code: KW-2310
Use these Quick Connect wires to wire buttons easily without soldering. The connectors are suitable for tabs up to 4.8mm wide.One set of wires is made up of two wires with tab connectors on one side, and a single 2-way 2.54mm JST-XH connector on the other side. Length is approx. 20cm...
In Stock: In Stock Product Code: KW-2309
Use these Quick Connect wires to wire buttons easily without soldering. The connectors are suitable for tabs up to 6.35mm wide.One set of wires is made up of two wires with tab connectors on one side, and a single 2-way 2.54mm JST-XH connector on the other side. Length is approx. 20cm...
Showing 1 to 12 of 87 (8 Pages)