PowerBoost 500 Charger - 5V Lipo USB Boost @ 500mA+

PowerBoost 500 Charger - 5V Lipo USB Boost @ 500mA+
PowerBoost 500 Charger - 5V Lipo USB Boost @ 500mA+
PowerBoost 500 Charger - 5V Lipo USB Boost @ 500mA+
PowerBoost 500 Charger - 5V Lipo USB Boost @ 500mA+
PowerBoost 500 Charger - 5V Lipo USB Boost @ 500mA+
PowerBoost 500 Charger - 5V Lipo USB Boost @ 500mA+
PowerBoost 500 Charger - 5V Lipo USB Boost @ 500mA+
PowerBoost 500 Charger - 5V Lipo USB Boost @ 500mA+
PowerBoost 500 Charger - 5V Lipo USB Boost @ 500mA+
PowerBoost 500 Charger - 5V Lipo USB Boost @ 500mA+
PowerBoost 500 Charger - 5V Lipo USB Boost @ 500mA+
PowerBoost 500 Charger - 5V Lipo USB Boost @ 500mA+
PowerBoost 500 Charger - 5V Lipo USB Boost @ 500mA+
PowerBoost 500 Charger - 5V Lipo USB Boost @ 500mA+

Description

The PowerBoost 500 is a compact power module for portable electronics and embedded projects. It converts the voltage of a 3.7V LiIon or LiPo battery to a stable 5.2V output, making it suitable for powering 5V electronics more reliably under varying loads or with longer cables.

Its integrated charging circuit allows the connected battery to be recharged over microUSB at up to 500mA. At the same time, the 5.2V output remains available, making this board a practical solution for mobile devices, prototypes and compact power designs that need charging and boosting in one module.

Product features

  • Boost converter from 3.7V battery input to 5.2V DC output
  • Compatible with 3.7V and 4.2V LiIon and LiPo batteries
  • Integrated battery charger over microUSB, up to 500mA charge rate
  • 500mA+ output current, with peaks depending on the battery
  • Low battery indicator below 3.2V
  • Enable pin to fully disable the output
  • High efficiency of over 90 percent in many use cases
  • Compact board for portable and space-saving designs

Technical specifications

  • Battery input voltage: 3.7V nominal LiIon or LiPo
  • Battery charge voltage: 4.2V
  • Output voltage: 5.2V DC
  • Maximum charge current: 500mA
  • Output current: 500mA+
  • Switching frequency: 700kHz
  • Quiescent current enabled: 5mA
  • Quiescent current disabled: 20uA
  • Dimensions: 22 x 37 x 2 mm
  • Height with JST connector: 7 mm
  • Weight: 4 g

Reviews

PowerBoost 500 Charger - 5V Lipo USB Boost @ 500mA+
Product Code: ADA-1944
€ 13.49
Ex. VAT
10 or more € 12.82 Ea. (-5%)
This product is out of stock
  • Shipping from € 61.57 to United States
  • 30 days money back guarantee
  • Fast shipping from The Netherlands

Package Contents

  • PowerBoost 500 Charger module, fully assembled and tested
  • USB A connector, included loose

Specifications

General
Product CodeADA-1944
BrandAdafruit
MPNP1944
Technical
Output Current (Max)0.5A
Output Voltage5.1 VDC
Plug AJST-PH 2.0
Plug BUSB-A
Plug TypeJST
Other
Dimensions22mm x 37mm x 2mm
Weight4g

You might like these as well

This battery pack is made of 2 balanced 2200mAh cells for a total of 4400mA capacity. The cells are connected in parallel and spot-welded to a protect..
€ 9.99 Ex. VAT
This 3.7 V lithium-polymer battery with a generous 2500 mAh capacity is ideal for projects that require extended operating time and reliable performan..
€ 8.49 Ex. VAT
This 3.7 V lithium-polymer rechargeable battery with a 1200 mAh capacity is a compact and reliable power source for various electronic projects. Its s..
€ 6.49 Ex. VAT
This little DC/DC boost converter module can run from 1.8V batteries or higher, and convert that voltage to 5.2V DC for running your 5V projects. The ..
€ 9.19 Ex. VAT
This little DC/DC boost converter module can run from 1.8V batteries or higher, and convert that voltage to 5.2V DC for running your 5V projects.T..
€ 13.99 Ex. VAT
Fast shipping
Order before 17:00h (Mon-Fri) for same day shipping.
Money back guarantee
You have a 30-day return period on your order
Worldwide shipping
Shipped from the Netherlands using PostNL and DHL.
Thuiswinkel.org Lid