Kitronik Inventor's Kit for the Raspberry Pi Pico

Kitronik Inventor's Kit for the Raspberry Pi Pico
Kitronik Inventor's Kit for the Raspberry Pi Pico
Kitronik Inventor's Kit for the Raspberry Pi Pico
Kitronik Inventor's Kit for the Raspberry Pi Pico
Kitronik Inventor's Kit for the Raspberry Pi Pico
Kitronik Inventor's Kit for the Raspberry Pi Pico
Kitronik Inventor's Kit for the Raspberry Pi Pico
Kitronik Inventor's Kit for the Raspberry Pi Pico
Kitronik Inventor's Kit for the Raspberry Pi Pico
Kitronik Inventor's Kit for the Raspberry Pi Pico
Kitronik Inventor's Kit for the Raspberry Pi Pico
Kitronik Inventor's Kit for the Raspberry Pi Pico

Description

The Kitronik Inventor's Kit for the Raspberry Pi Pico offers the perfect introduction to physical computing with the Pico. This Inventor's Kit contains everything you need to complete 10 exciting experiments and the included booklet walks you through every step of each. Note: The Pico is not supplied with this kit, a pre-soldered one can be obtained separately here.

Features

  • The Kitronik Inventor's Kit for the Raspberry Pi Pico provides a fantastic way of learning how to construct and control electronic circuits with the Pico and MicroPython.
  • No soldering is required, build your first circuit in minutes.
  • Work through the 10 included experiments, following the detailed full-colour guide booklet.
  • The kit includes the Kitronik Inventors prototyping system, also found in the  Inventor's Kit for micro:bit and Inventors Kit for Arduino.

The possibilities for the kit are endless and the booklet is intended to get you off to a flying start. Before moving on to the experiments, it introduces you to the Raspberry Pi Pico and guides you in getting it ready for use. There is also an introduction to coding, how to run Python code on the Pico, guidance on using Breadboards, and also a detailed assembly guide for the kit.

Each experiment is then explained in full in a clear and concise manner. The full-colour booklet details the parts you need, the code used, a breadboard wiring diagram, a circuit diagram, and a full description of what is happening and why. The 10 experiments start simple and get more difficult as you progress through them.

Much like Kitronik's Inventor's Kit for micro:bit and Inventors Kit for Arduino, this kit is built around their Inventor's prototyping system. It comprises an injection moulded base plate, onto which the breadboard is affixed, and the included laser cut plate is mounted. The laser-cut plate has mounting points for the included motor, servo, and Pinout board for Raspberry Pi Pico. There are also more than 60 components and connectors in the kit, such as; LEDs, switches, motors, transistors, resistors, and more! Please see the package contents block on the side for a full list.

Kit description

Required

Reviews

Add to Wish List Kitronik Inventor's Kit for the Raspberry Pi Pico
Product Code: KW-3020
€ 28.88
Ex. VAT
10 or more € 26.57 Ea. (-8%)
Need larger quantities? Ask for a quote!
  • 13 piece(s) in stock
Also add
  • Ordered before 17:00, shipped today.
  • Shipping from € 15.00 to United States
  • 30 days money back guarantee
  • Fast shipping from The Netherlands

Video

Documentation

The table below contains additional resources for each of the included experiments. This includes; Video walk-throughs for each and code that can be copied and then pasted into an editor, such as Thonny.

Package Contents

  • 1 x Full-colour instruction booklet
  • 1 x Kitronik injection moulded Inventor's prototyping mounting plate
  • 1 x Laser cut Pico mounting plate and fixings
  • 1 x Pico Pin Breakout Board
  • 1 x Kitronik 5 LED ZIP stick with pins
  • 1 x Mini 180 Degree Resin Gear Servo SG90
  • 1 x 7 segment display
  • 4 x Push switch
  • 2 x Red 5mm LED
  • 2 x Green 5mm LED
  • 2 x Yellow 5mm LED
  • 2 x Orange 5mm LED
  • 10 x 220Ω resistor
  • 5 x 2.2kΩ resistor
  • 5 x 10kΩ resistor
  • 1 x 3mm Phototransistor
  • 1 x Transistor (NPN BC337)
  • 1 x Fan blade
  • 1 x Motor
  • 1 x Piezo element buzzer
  • 20 x MM jumper wires
  • 1 x 470uF electrolytic capacitor
  • 1 x Terminal connector
  • 1 x Potentiometer & finger adjust spindle

Specifications

General
Product CodeKW-3020
BrandKitronik
MPN5342
PlatformRaspberry Pi (RP2040)
For use withRaspberry Pi Pico

You might like these as well

Raspberry Pi Pico is the first product built on silicon designed in-house at Raspberry Pi. The board is programmable in MicroPython or C/C++.
€ 3.26 Ex. VAT
The Pico-10DOF-IMU is an IMU sensor expansion module specialized for Raspberry Pi Pico.
€ 22.27 Ex. VAT
A 2.9 inch 3-color E-paper module for your Raspberry Pi Pico
€ 19.79 Ex. VAT
he Pico-Clock-Green is an LED digits electronic clock designed for the Raspberry Pi Pico.
€ 34.67 Ex. VAT
The Raspberry Pi Pico H has a custom designed 40-pin header and a 3-pin JTAG connector pre-soldered.
€ 4.92 Ex. VAT
Fast shipping
Order before 17:00h (Mon-Fri) for same day shipping.
Money back guarantee
You have a 30-day return period on your order
Worldwide shipping
Shipped from the Netherlands using PostNL and DHL.