Your shopping cart is empty
WiFi / Wireless
This antenna is about 220mm long from tip to tip and with a cable thickness of 0.8mm, its for 2.4GHz WiFi or BLE with a 4dBi gain.
With this cable you can connect SMA or RP-SMA antennas to a MHF3/ IPEX3 / wFL / w.FL connector.
Mini PCIe LTE Cat 4 module with GNSS support, ideal for IoT, asset tracking, and remote monitoring applications.
This 100mm long flexible uFL 2.4GHz antenna has approx 4DBi gain and a 50Ω impedance.
USB Zigbee 3.0 dongle for Home Assistant and Zigbee2MQTT. Reliable, compact, and supports a wide range of Zigbee devices.
The Arduino MKR WiFi 1010 is the easiest point of entry to basic IoT and pico-network application design.
The ESP32-S2 is a highly-integrated, low-power, 2.4 GHz Wi-Fi System-on-Chip (SoC) solution that now has built-in native USB.
The ESP8266 processor is an 80 MHz microcontroller with a full WiFi front-end (both as client and access point) and TCP/IP stack with DNS support as well.
This is the Adafruit Feather HUZZAH ESP8266 - Adafruit's take on an 'all-in-one' ESP8266 WiFi development board with built in USB and battery charging.
Compacte 4G-antennekit met SMA-connector, 2 dBi versterking en ondersteuning voor 868–915 MHz, geschikt voor IoT en industriële toepassingen.
The e-Paper ESP32 Driver Board is a wireless solution for refreshing e-Paper display content.
UartSBee v5' is FTDI cable compatible USB to Serial adapter equipped with BEE socket (20pin 2.0mm).