HiFiBerry Digi+ Standard with Spacers

HiFiBerry Digi+ Standard with Spacers
HiFiBerry Digi+ Standard with Spacers
HiFiBerry Digi+ Standard with Spacers
HiFiBerry Digi+ Standard with Spacers
HiFiBerry Digi+ Standard with Spacers
HiFiBerry Digi+ Standard with Spacers
HiFiBerry Digi+ Standard with Spacers
HiFiBerry Digi+ Standard with Spacers
HiFiBerry Digi+ Standard with Spacers
HiFiBerry Digi+ Standard with Spacers
HiFiBerry Digi+ Standard with Spacers
HiFiBerry Digi+ Standard with Spacers

Description

The HiFiBerry Digi+ is a high-quality S/PDIF output board for the Raspberry Pi. It is designed as an add-on board that connects to the main header of the Raspberry Pi

Features

  • Dedicated S/PDIF interface chip supports up to 192kHz/24bit resolution
  • Optical (Toslink) and electrical outputs
  • Bit-perfect output, audio data stream will not be modified in any way
  • Connects directly to the Raspberry Pi, no additional cables needed
  • No soldering. The Digi+ comes as a pre-fabricated kit. You just plug it onto the Raspberry Pi. The board conform to the Raspberry Pi hardware-attached-on-top (HAT) specification.
  • Directly powered from the Raspberry Pi, no additional power supply
  • Optional: high-bandwidth output transformer provides full galvanic isolation of the electrical output (not in the standard version)
  • Integrated EEPROM for automatic configuration (with write-protection).
    Note that this feature is still in development by the Raspberry Pi foundation. You will be able to upgrade your HiFiBerry DAC+ when it is officially available. The sound card already works without this feature.
  • Comes with all components required to mount it. We include 4 M2.5x12mm spacers to fix the board onto the Raspberry Pi.

Compatible with

Important note: While the hardware is able to output DTS/Dolby Digital, software has to be adapted to support this. We will support the developers to implement this. Unfortunately we can’t guarantee that this feature will work with a specific software. Please ask the developers of the software if this is supported.

Output Transformer

The output transformer provides a full galvanic isolation between the Raspberry Pi and your DAC on the electrical output. Usual consumer-grade SPDIF outputs do not use output transformers. Usually this works without problems. However, many audio enthusiast like to use this option. If you’re not sure, the standard version is most likely ok for you.
The output transformer does not have any effect on the optical output. Therefore if you plan to use only the optical output, the standard version will do the job.

This version is the standard version without an output transformer. Click here for the version with output transformer.

Reviews

HiFiBerry Digi+ Standard with Spacers
Product Code: RPI-HB+DIGIST
€ 29.90
Ex. VAT
10 or more € 28.41 Ea. (-5%)
19 piece(s) in stock
  • Shipped on Wednesday when ordered now.
  • Shipping from € 9.00 to United States
  • 30 days money back guarantee
  • Fast shipping from The Netherlands

Specifications

General
Product CodeRPI-HB+DIGIST
BrandHiFiBerry
EAN4260439550095
MPNHiFiBerry Digi+/standard
For use withRaspberry Pi 3 Model B+
Raspberry Pi 3 Model A+

You might like these as well

Use this cable to connect, for example, the HiFiBerry Digi 2 to your AV receiver. Length is 1 meter.
€ 3.99 Ex. VAT
Use this cable to connect, for example, the HiFiBerry Digi 2 to your AV receiver. Length is 3 meter.
€ 4.99 Ex. VAT
This mounting kit allows you to securely attach the expansion board(s) / HATs to your Raspberry Pi.
€ 4.79 Ex. VAT
The HiFiBerry DAC+ Light is a high-resolution digital-to-analog converter for the Raspberry Pi. This is a special sound card for the Raspberry Pi, that is optimized for one specific use case: the best audio playback quality.
€ 24.79 Ex. VAT
Fast shipping
Order before 17:00h (Mon-Fri) for same day shipping.
Money back guarantee
You have a 30-day return period on your order
Worldwide shipping
Shipped from the Netherlands using PostNL and DHL.