Grove Base Hat for Raspberry Pi

This is the enhanced Grove Pi Hat for Raspberry Pi, where it breaks out all the pins and power of the board to produce 15 multi-function Grove ports and led out the compatible Pi 24-Pin GPIO, SWD debug interface. With its convenient feature and the entire Grove system supported, it will be your good assistant when you try to start your projects with Raspberry Pi.

Powered by the MM32F031F6P6 chip, the 15 onboard Grove connectors are designed as 3x I2C, 1x UART communication ports, 1x PWM port, and 4x Analog with 6x Digital transmitted ports, where it supports more than 60 related Grove modules. This Pi Hat also comes up with the Raspberry Pi compatible 24-Pin GPIO and the SWD debug interface for further usage at the same time without pulling out.

Feature

• Grove & GPIO Pi Hat for Raspberry Pi Series: Break out all the pins and power of the Raspberry Pi to provide 15 multi-function Grove ports and compatible 24-Pin GPIO based on a 12-bit ADC MM32 chip
• Rich Peripherals for Grove: Provide 15 Grove ports including 3x I2C, 1x UART, 6x Digital, and 4x Analog, which also contains 1x PWM port, and the SWD Debug interface.
• Plug and Play: Benefit from convenient Grove connectors that supports more than 60 Grove modules

Note: Please note that Seeed have changed the chip from the original one STM32 to the new one MM32, where the I2C address has changed from 0x04 from 0x08.