Raspberry Pi Pico WH

The Raspberry Pi Pico WH is based on the Raspberry Pi RP2040 chip, but with wireless connectivity added! The Pico WH boast an Infineon CYW43439 wireless chip which supports IEEE 802.11 b/g/n wireless LAN, and Bluetooth 5.2.

The Raspberry Pi Pico WH has a custom designed 40-pin header and a 3-pin JTAG connector pre-soldered.

At the heart of the Pico WH you find the RP2040, a Raspberry Pi-designed chip, which features two ARM Cortex-M0+ cores clocked at 133MHz, 256KB RAM, 30 GPIO pins, and a broad range of interfacing options. This is paired with 2MB of on-board QSPI Flash memory for code and data storage.

Features

• RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
• Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
• 264KB of SRAM, and 2MB of on-board Flash memory
• On-board single-band 2.4GHz wireless interface (802.11n) - Infineon CYW43439
• USB 1.1 with device and host support
• Low-power sleep and dormant modes
• Drag-and-drop programming using mass storage over USB
• 26x multi-function GPIO pins
• 2x SPI, 2x I2C, 2x UART, 3x 12-bit ADC, 16x controllable PWM channels
• Accurate clock and timer on-chip
• Temperature sensor
• Accelerated floating-point libraries on-chip
• 8x Programmable I/O (PIO) state machines for custom peripheral support
• Dimensions: 21mm(W) x 51.3mm(L) x 12.9mm(H)