Heatsinks & Fans

This 5V cooling fan with a blue LED runs smoothly and quietly and it’s good for heat dissipation of the Raspberry Pi. Screws for assembly are included.IncludedCooling Fan Screw SetDimensions: 30x30x7.8mm..

The Raspberry Pi 4 Case Fan is an official accessory for Raspberry Pi 4, for use with the official Raspberry Pi 4 Case. Designed for over-clockers and other power users, it keeps your Raspberry Pi 4 at a comfortable operating temperature even under heavy load.FeaturesFits perfectly into t..

A dedicated cooling fan for the Jetson Nano. You can mount it on top of your Jetson Nano, or combine it with this case...

A dedicated 40mm Cooling Fan for Jetson Nano, 5V, 3-pin Reverse-proof. Comes with screws for easy mounting.FeaturesConnector: 3-pin reverse-proof connector Voltage: 5V Dimensions: 40mm×40mm×10mm Weight: 25gr..

Keep your new Raspberry Pi 4 cool with this heat sink. The Raspberry Pi 4 runs a lot hotter than the previous versions, so extra cooling is welcome!This cooling block ensures that the heat dissipation goes much better. Keep in mind that your case does need sufficient ventilation holes. In the of..

This mini fan is 30x30mm and 8mm tall. It works with 5V which makes it ideal to be used with the Raspberry Pi, or in other small electronics projects that needs some cooling/air flow...

This mini fan is 30x30mm and 8mm tall. It works with 5V which makes it ideal to be used with the Raspberry Pi for example...

Use this 12V 40mm fan to keep your project cool.Dimensions: 40x40x10mm Connector:2pin(2.0) Rated Voltage: 12V Rated Current: 0.11±0.02 Amp Rated Speed: 6500 ±10%rpm Air Flow:9.8CFM Noise: 15±10%dB Bearing Type: Sleeve Cable Length:13cm Quantity: 1pcs W..

Dimensions: 60mm x 60mm x 10mm Connector: XH2.54-2P Rated Voltage: DC 12V Bearing Type: Dual Ball Rated Current: 0.16Amp±10% Rated Speed: 3800RPM±10% Air Flow: 19.8CFM   Noise Level: 29dBA±10% Life: 35000 hours Cable Length: 25cm Weight: 24g..

The Raspberry Pi Heat Sink Kit is specially sized for the two main heat sources of the Raspberry Pi to properly cool without the use of noisy fans.FeaturesSuitable for the Raspberry Pi 1B+, 2B, 3 and 4 Two heat sinks - 1x for the CPU (14x14x10mm), 1x for the USB/Ethernet controller (10x..

Get the most out of your regulators, transistors and other TO-220 packaged chips by clipping on a heat-sink. Your transistor or regulator may advertise it can handle high currents but when multiplied by the drop voltage, the Wattage may be too high for the bare chip! Most TO-220's can dissipate ..