The FC681474 is a panel mounting DC Socket with solder contact termination, 1A/12VDC rated. This round style DC socket has an M12.7 thread and is supplied with a nut.>=100MR at 500VDC Insulation resistance
<=30mR (initial) and <=60mR (after life test) Pin to contact resistance
Connects from output cable of the V88 Laptop Battery to most MacBooks manufactured between Mid 2012 - 2015 (see complete compatibility below). Salvaged and reconfigured MagSafe 2 Adapter on one end and female 5.5x2.1mm jack on the other.Apple: MacBook Pro Retina (Mid 2012), MacBook Pro Retina 13..
Two pin JST connector to a 2.1x 5.5mm barrel jack, 6.25 inch long jumper cable. We use this cable to adapt from a wall power supply to a relatively small, SMD JST connector. We found that many of the SMD connectors used for battery charging were too large or were not capable of through-putting the c..
This power socket is designed to fit 2.1mm power plugs snugly and securely. Perfect for adding a power connector to your project. The connector has M12.7 thread and can be secured with the supplied nut.Rating: max. 12V / 1A..
This power jack is designed to fit 2.1mm power plugs snugly and securely. Perfect for adding a power connector to your project. We went for the more expensive "thin pin" type which snap into breadboards or perfboards. They will work where "thick pin" types go also, just need a li..
Turn a wall adapter into a mini power supply with this incredibly useful adapter. A high quality molded 2.1mm DC barrel jack is brought out to red (center positive) & black (ring negative) alligator clips. Works with just about every wall adapter, good for about 2 or 3 Amps of current and up to ..
This is a connector that fits directly to the edge contacts of a BBC micro:bit. The connector has 80 pins, but because of the different widths of the micro:bit edge contacts, some of the micro:bit contacts will map to more than one of this connector's pins. Also, the back half of the pins are not us..
The cables are approx. 15 cm long and have a 3-way JST SM male and female connector. This type of connector is ideal when you have 3 wires you need to be able to connect or disconnect easily.This connector is also used for our digital LED strips...