Educational LCD oscilloscope kit - Soldering kit

Build your own oscilloscope and learn to visualize signals. Find out what the signals actually look like. This affordable oscilloscope is equipped with many functions that you normally only see on expensive devices such as signal markings, frequency response, dB measurements, true RMS measurements. With the powerful automatic adjustment function you can get started right away.

Specifications

• High Contrast LCD Display: 64 x 128 pixels with white backlight
• max. sampling rate: 1MS/s for repeated signals, 100kS/s in real time
• bandwidth of the input amplifier: 200kHz (-3 dB)
• measurements up to: 100kHz
• input impedance: 100kohm // 20pF
• max. input voltage: 30Vpeak (AC + DC)
• input coupling: DC and AC
• AD resolution: 8 bits
• operating modes: run, single
• adjustable trigger level: in 16 steps
• time base range: in 15 steps, 10µs/division to 500ms/division
• input sensitivity range: in 6 steps, 100 mV/division to 5 V/division
• output test signal: 1.95kHz / 3.3Vpp
• fully automatic setting function for: V/div and time/div (or manual)
• sensitivity lower than 10mV
• display: DC, AC+DC, true RMS, dBm, Vpp, min. & max.
• display of the signal markers for time and voltage
• frequency display (via markers)
• battery powered: 4 x AAA battery (max. 100mA)
• automatic power saving mode

Note

This oscilloscope is not suitable for taking measurements at voltages higher than 30Vpp.

4 x AAA-batterij not included