Compute Module 5 Development Kit - EU plug

A complete development kit for the Raspberry Pi Compute Module 5, providing all products required to allow you to start a design "out of the box".

Kit contents

• Raspberry Pi Compute Module 5 Wireless, 4GB RAM, 32GB eMMC
• Raspberry Pi Compute Module 5 IO Board
• Raspberry Pi IO Case for Raspberry Pi Compute Module 5
• Raspberry Pi Cooler for Raspberry Pi Compute Module 5
• Raspberry Pi Antenna Kit
• Raspberry Pi 27W USB Type-C PD Power Supply with EU plug
• 2× HDMI to HDMI cables
• Official USB-A to USB-C Cable

IO board

The Raspberry Pi Compute Module 5 IO Board breaks out every interface from a Compute Module 5. It provides a development platform and reference baseboard, reducing the time to market for Compute Module 5 based designs.

Features

• Standard 40-pin GPIO connector
• 2 x full-size HDMI 2.0 connectors
• 2 x 4-lane MIPI DSI/CSI-2 FPC connectors (22-pin, 0.5mm pitch cable)
• 2 x USB 3.0 connectors
• Gigabit Ethernet jack with PoE support (requires a separate Raspberry Pi PoE HAT)
• M.2 M-key PCIe socket (for 2230, 2242, 2260 and 2280 modules)
• MicroSD card socket (for use with Lite modules)
• RTC battery socket
• 4-pin fan connector
• External power via a USB-C power supply

IO Case

Metal case designed to fit the Compute Module 5 IO Board. The case includes an integrated fan, which can be connected to the 4-pin fan connector on the IO Board to improve thermal performance of the Compute Module 5.

Passive Cooler

An aluminium heat designed to fit on a Compute Module 5. Includes thermal pads for maximum heat transfer from the CPU, memory, wireless module (if fitted) and eMMC (if fitted) components to the heatsink itself.

Antenna Kit

Variants of Compute Module 5 that include an onboard wireless module (part numbers CM51xxxxx) provide an onboard PCB antenna, and a UFL connector which allows an optional external antenna to be used.
The Antenna Kit is the same kit already for use with the Compute Module 4 wireless boards. Compute Module FCC modular compliance covers use of the onboard PCB antenna or the Antenna Kit.