Carrying a GrovePi+ board together with 12 carefully selective Grove sensors with 10 pieces cables , this starter kit gets you up and running with the Raspberry Pi quickly. Just slip the GrovePi+ board over your Raspberry Pi and connect sensors to the board, you’re ready to star..
The 7" Touchscreen Monitor for Raspberry Pi gives users the ability to create all-in-one, integrated projects such as tablets, infotainment systems and embedded projects. The 800 x 480 display connects via an adapter board which handles power and signal conversion. Only two connections to the P..
Designed to house the Raspberry Pi B+, Raspberry Pi 2, Raspberry Pi 3 and HAT PCBs
HAT can be removed without removing the Raspberry Pi from the enclosure
All cut-outs are pre-cut into the case
Camera ribbon slot in enclosure lid
Display ribbon slot in enclosure lid
Label recess on enclosu..
The Raspberry Pi NoIR Camera Module v2 is a high quality 8 megapixel Sony IMX219 image sensor custom designed add-on board for Raspberry Pi, featuring a fixed focus lens.It's capable of 3280 x 2464 pixel static images, and also supports 1080p30, 720p60 and 640x480p90 video.It attaches to..
The 1 Wire Pi Plus from AB Electronics UK is a communication board supporting the 1-Wire® protocol designed for use on the Raspberry Pi. A 5V buffered I2C port is also provided on the board. The 1 Wire Pi Plus can be securely fitted to your Raspberry Pi using the mounting kit pack.
The 1 Wire Pi Zero from AB Electronics UK is a communication board supporting the 1-Wire® protocol designed for use on the Raspberry Pi Zero. A 5V buffered I2C port is also provided on the board. The 1 Wire Pi Zero can be securely fitted to your Raspberry Pi using the mounting ki..
This is an IPS LCD display HAT for the Raspberry Pi. A 1.3inch 240x240 display, with embedded controller, communicating via SPI interface.Trying to add a control interface for your Pi? This compact display would be the ideal choice.FeaturesStandard Raspberry Pi 40-pin GPIO extens..
Provide your project with a wide touch display with this 11.9 inch screen with a 320x1480 resolution. The screen can be used with a Raspberry Pi, Jetson Nano and PC/laptop. Ideal for use as a touch panel in the wall, or simply as an extra wide display.Make sure you configure the correct settings..
This 16mm lens for the Raspberry Pi High Quality Camera is comparable to a video telelens.Main featuresFocal length: 16mm
Aperture: 1.4 - 16
Min. object distance: 20cm
Weight: 133.7gThis is just the lens. The Raspberry Pi HQ Camera can be..
This is a 3.5 inch LCD display which fits right onto the GPIO header of the Raspberry Pi. Ideal to create a small touch interface for example.Features480x320 hardware resolution
Resistive touch control
Supports any type of Raspberry Pi
Drivers provided (works with your own Raspbian/..
Get up and running quickly with this 32GB microSD card with the latest version of Raspberry Pi OS pre-installed.Comes in a jewelcase with a microSD to SD adapter included.Compatible with all Raspberry Pi's...
This is a 4-channel current and power monitor HAT designed for the Raspberry Pi. Via the I2C or SMBus interface, it's easy to monitor each channel's current, voltage and power consumption, as well as the voltage between both sides of the sampling resistor.FeaturesStandard Raspberr..