All Products
In Stock: In Stock
Product Code: WS-19358
The Pico-10DOF-IMU is an IMU sensor expansion module specialized for Raspberry Pi Pico. It incorporates sensors including gyroscope, accelerometer, magnetometer, baroceptor, and uses I2C bus for communication.Combined with the Raspberry Pi Pico, it can be used to collect environment sensing data..
In Stock: In Stock
Product Code: WS-19454
Provide your project with a wide touch display with this 11.9 inch screen with a 320x1480 resolution. The screen can be used with a Raspberry Pi, Jetson Nano and PC/laptop. Ideal for use as a touch panel in the wall, or simply as an extra wide display.Make sure you configure the correct settings..
-20%
In Stock: In Stock
Product Code: WS-16549
A 15.6 inch Full HD HDR rechargeable display for universal use.The display has an integrated 10,000mAh battery (good for three to four hours of use), which makes the display usable on the go.The screen has toughened glass(6H), small hi-fi speakers on the front, a viewing angle of 178 degrees..
In Stock: In Stock
Product Code: KW-2537
This is a 5V 16-Channel Relay interface board that can be used with an Arduino or Raspberry Pi. The Raspberry Pi can switch the relays directly because of the optocouplers that are used to toggle the relays.Features5V 16-Channel Relay interface board
Equipped with high-current relay, AC..
Out Of Stock
Product Code: WS-19804
Add a small display to your Raspberry Pi Pico with this 2.8 inch resistive touch display module.The display is equiped with an SD-card slot for extra storage. There's also a power saving option, and the backlight is porgrammable.You have to solder male headers to your Pico to use this di..
In Stock: In Stock
Product Code: KW-2627
A translucent blue 24mm arcade button with built-in LEDs. The required hole diameter for this button is 24mm.The arcade button screws in place and can be used with up to approx. 14mm thick material. The push action is smooth and you don't feel a click with this button.DetailsSuppl..
In Stock: In Stock
Product Code: KW-2625
A translucent green 24mm arcade button with built-in LEDs. The required hole diameter for this button is 24mm.The arcade button screws in place and can be used with up to approx. 14mm thick material. The push action is smooth and you don't feel a click with this button.DetailsSupp..
In Stock: In Stock
Product Code: KW-2624
A translucent red 24mm arcade button with built-in LEDs. The required hole diameter for this button is 24mm.The arcade button screws in place and can be used with up to approx. 14mm thick material. The push action is smooth and you don't feel a click with this button.DetailsSupply..
In Stock: In Stock
Product Code: KW-2626
A translucent white 24mm arcade button with built-in LEDs. The required hole diameter for this button is 24mm.The arcade button screws in place and can be used with up to approx. 14mm thick material. The push action is smooth and you don't feel a click with this button.DetailsSupp..
In Stock: In Stock
Product Code: KW-2623
A translucent yellow 24mm arcade button with built-in LEDs. The required hole diameter for this button is 24mm.The arcade button screws in place and can be used with up to approx. 14mm thick material. The push action is smooth and you don't feel a click with this button.DetailsSup..
In Stock: In Stock
Product Code: KW-2991
3D Touch V3.2 is the new generation automatic leveling accessory for FDM 3D printers with heated beds. Built using the latest technology, it can accurately measure the inclination of the print bed. It can be used for heated beds made of glass, wood, metal, etc. Users no longer need to manually level..
-20%
In Stock: In Stock
Product Code: WS-15195
This is an E-Ink display HAT for the Raspberry Pi, 9.7inch, 1200x825 resolution, with embedded controller IT8951, communicating via USB/SPI/I80 interface, supports partial refresh.Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is..