M.2 NVME M-Key 2242 and PoE HAT for RPi5

POE M.2 HAT+ is an expansion board that combines Power over Ethernet (PoE) and PCIe to M.2 functions for your Raspberry Pi 5, supporting the IEEE 802.3af/at network standard. It also supports M.2 NVME hard drives of 2230 and 2242 sizes, and SSD booting for your Raspberry Pi.

Features

• Based on Raspberry Pi 40pin GPIO interface, suitable for Raspberry Pi 5 only
• Support PoE power over Ethernet and IEEE 802.3af/at PoE network standard
• Adopt fully isolated switch mode power supply (SMPS)
• Onboard high-speed active cooling fan, equipped with metal fins, jointly accelerates heat dissipation
• Support NVMe protocol M.2 interface hard disk protocol, high-speed read and write, high work efficiency
• PCI-E×1 Gen2 or Gen3 modes
• Compatible with M.2 hard drives of sizes 2230 and 2242
• Onboard work indicator light, the PWR stays on when powered on, the read/write ACT flashes, and the working status is clear at a glance

POE parameters

• POE input voltage: 37V~57V DC input
• POE GPIO Pin: 5V 4.5A (MAX)
• POE - 2P Pin: 12V 2A (MAX)
• Network standard: Supports IEEE 802.3af/at PoE
• Product size: 56.5mm × 70.0mm

Content

• PoE M.2 HAT
• metal heatsink
• PCIe cable 40mm
• thermal tape
• screws and bushings