10.1 inch DSI touch display for Raspberry Pi

10.1 inch DSI touch display for Raspberry Pi
10.1 inch DSI touch display for Raspberry Pi
10.1 inch DSI touch display for Raspberry Pi
10.1 inch DSI touch display for Raspberry Pi
10.1 inch DSI touch display for Raspberry Pi
10.1 inch DSI touch display for Raspberry Pi
10.1 inch DSI touch display for Raspberry Pi
10.1 inch DSI touch display for Raspberry Pi

Description

A 10.1 touch DSI display for your Raspberry Pi with a resolution of 1280x800. The Raspberry Pi can be mounted on the back of the display on the control board using the supplied screws and DSI flatcable. The screen is powered through the DSI cable so you don't need an additional power supply for the display!

By default, you have access to 1-point touch if you don't install the Waveshare driver. Want multitouch operation and control of screen brightness? Then you need to install the driver. See the documentation block.

Specifications

Voltage5V (powered by Pi power supply)Display colorHD full color
InterfaceDSIDisplay panelIPS
Dimensions239x147x5mm (239x147x30 with Pi mounted)Resolution1280x800 pixels
Touch typeCapacitive 10-points (depending on OS)Viewing angle178°

Reviews

Add to Wish List 10.1 inch DSI touch display for Raspberry Pi
Product Code: WS-23450
€ 82.60
Ex. VAT
10 or more € 76.82 Ea. (-7%)
Need larger quantities? Ask for a quote!
  • 25 piece(s) in stock
  • Shipped on Tuesday when ordered now.
  • Shipping from € 45.89 to United States
  • 30 days money back guarantee
  • Fast shipping from The Netherlands

Documentation

Waveshare installation guide

Note: There is no driver available yet for Raspberry Pi OS Bookworm. With Bookworm, you currently only have 1-point touch.

Raspberry Pi 5 information

If you want to use this display with a Raspberry Pi 5, you'll need to add the following line to /boot/firmware/config.txt and comment out display autodetection:

dtoverlay=vc4-kms-dsi-waveshare-panel,invx,swapxy,dsi0

This is for when the display is connected to port 0. Change dsi0 to dsi1 if you want to use port 1.

Package Contents

  • 1x 10.1inch DSI LCD (C)
  • 2x 50mm Flex cable 15-pin 1.0 pitch (opposite sides)
  • 1x Screws pack

For use with the Pi 5, make sure to order a standard-mini display cable as well.

Specifications

General
Product CodeWS-23450
BrandWaveshare Electronics
MPN23450
For use withRaspberry Pi 5
Raspberry Pi 4
Raspberry Pi 3 Model B+
Technical
Display connectionDSI
Display TypeLCD
Screen resolution1280x800
Screen size10.1 inch
Other
Dimensions239 x 147mm

You might like these as well

This 7 inch Touchscreen gives users the ability to create all-in-one, integrated projects such as tablets, infotainment systems and embedded projects.
€ 61.94 Ex. VAT
A 4.3 inch DSI touchscreen for the Raspberry Pi. Connect the screen to your Raspberry Pi via the included DSI cable and the screen works immediately, no software or customization is required.
€ 37.15 Ex. VAT
A fully lamimated 10.1 inch display for Raspberry Pi or PC
€ 140.45 Ex. VAT
This metal case for the Raspberry Pi 4 includes a 480x320 touchscreen.
€ 37.15 Ex. VAT
A 4.3 inch DSI QLED touchscreen for the Raspberry Pi, with a resolution of 800x480.
€ 43.76 Ex. VAT
Fast shipping
Order before 17:00h (Mon-Fri) for same day shipping.
Money back guarantee
You have a 30-day return period on your order
Worldwide shipping
Shipped from the Netherlands using PostNL and DHL.