Your shopping cart is empty
Seeed Studio
The Lipo Rider Plus from Seeed is not only a Fast Charger but also a Strong PowerBoost, supports up to 5V/2A charging current, boost output integration, output up to 5V/2.4A, can also output 3.3V /250mA.
Seeed Studio XIAO ESP32S3 Sense integrates a camera sensor, digital microphone, and SD card support.
The Seeed Studio XIAO ESP32C6 is powered by the highly-integrated ESP32-C6 SoC, built on two 32-bit RISC-V processors.
ReSpeaker 2-Mics Pi HAT is a dual-microphone expansion board based on the TLV320AIC3104 for Raspberry Pi designed for AI and voice applications.
This NFC Antenna is a 13.56MHz antenna for Near Field Communication
Seeed Studio XIAO ESP32C3 is built around the 32-bit ESP32-C3 RISC-V chip processor with a four-stage pipeline that operates at up to 160 MHz.
The Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Twigs to the Stem - Basic Shield or to other Twig compatible boards for quick prototyping.
Grove is a convenient plug-and-play system with specialized interface, but that doesn’t mean it couldn’t be used in open ecosystem like breadboard.
The Seeed Studio XIAO ESP32C6 is powered by the highly-integrated ESP32-C6 SoC, built on two 32-bit RISC-V processors. This version is pre-soldered.
The Grove-GPS (Air530). It’s a high-performance, highly integrated multi-mode satellite positioning and navigation module to use with Arduino.
Seeed Studio XIAO RP2040 is an Arduino-compatible microcontroller featuring the Raspberry Pi RP2040 chip, and very small in size.
The Universal 4 Pin 5cm Unbuckled Cable is made for the Grove System to connect modules to the base shield, or other compatible boards for quick prototyping.