BitScope MP02 is an inline BNC adapter for BitScope Micro. It's designed for use with oscilloscope probes and coaxial cables.Supports Standard Oscilloscope Probes
Use Attenuating, Differential & Current Probes
Switchable Single In-Line Analog BNC Input (CHA)
Dual Analog Inputs v..
PRB-01 is a high quality general purpose probe compatible with all BNC terminated BitScopes.It is the recommended choice for high bandwidth signals ranging from 1mV to 110V (peak). PRB-01 incorporates a three position slide switch in the head which selects attenuation 10:1, 1:1 and ground refere..
BitScope Blade Duo Pi is a power and mounting solution for two Raspberry Pi and (optionally) Touchscreen Display.It's perfect for building industrial strength stand-alone fail-safe server solutions with Raspberry Pi.Key FeaturesPowers up to two Raspberry Pi.
Works with Pi 7&qu..
Quattro Pi is a BitScope Blade which can power and mount up to four Raspberry Pi. Quattro Pi can also power and mount the Raspberry Pi Display.It's perfect for building small dual processing redundant servers or stand-alone client/server solutions with one or two Raspberry Pi.Key Feature..
Uno Pi is a BitScope Blade designed to power and mount one Raspberry Pi and optional HAT. Uno Pi can also power and mount the Raspberry Pi Display.It's perfect for building industrial strength stand-alone physical computing solutions with a Raspberry Pi.Uno Pi has a built-in 5V switch mo..
The BS05U is a fully featured mixed signal test & measurement system. A mixed signal scope in a probe!Features20 MHz Bandwidth.
40 MSps Logic Capture.
2 Analog Scope Channels.
2 Analog Comparator channels.
6 Logic/Protocol Analyzer channels.
8 & 12 native analog sample..
BitScope MP01 is a dual channel mixed signal BNC adapter for the BitScope Micro. It connects standard oscilloscope probes.In addition to the two BNC connectors, MP01 includes a 16-pin socket and a pair of terminators for connection to all the BitScope Micro inputs and outputs. It plugs into BitS..
Don't let the tiny size fool you because this is a fully featured mixed signal test & measurement system. It's a lot more than just another little USB logic analyzer! It is a powerful USB oscilloscope and logic analyzer, arbitrary waveform generator and spectrum analyzer:100 MHz A..
SP01A is a dual channel BNC adapter for BitScope 10. It allows the use of industry standard oscilloscope probes. It also supports simultaneous use of the logic inputs and connection to the waveform and clock generator outputs. The SP01A adapter connects via the BitScope Smart Port allowing 1:1, 10:1..
PRB-02 is a very high impedance probe compatible with all BNC terminated BitScopes.It is the recommended choice for higher voltage signals ranging from 1V to 1kV (peak). It has fixed attentuation with low input capacitance suitable for use with sensitive high impedance circuits, especially at hi..
CLP-02 is an extra set of 10 test leads with mini-grabber clips for LP103X or with BS10U and BitScope Micro.They are ideal for surface-mount or thru- hole electronic components, fine gauge wire and circuit test points.When used with LP103W or LP103X they are suitable 3.3/5V CMOS & TTL lo..