Arduino Proto Shield Rev3 (Uno Size)

Arduino Proto Shield Rev3 (Uno Size)
Arduino Proto Shield Rev3 (Uno Size)
Arduino Proto Shield Rev3 (Uno Size)
Arduino Proto Shield Rev3 (Uno Size)
Arduino Proto Shield Rev3 (Uno Size)
Arduino Proto Shield Rev3 (Uno Size)
Arduino Proto Shield Rev3 (Uno Size)
Arduino Proto Shield Rev3 (Uno Size)

Description

The ProtoShield makes it easy for you to design custom circuits. You can easily solder TH or SMD ICs on the prototyping area to test them with your Arduino board. The SMD area is designed for a maximum of 24 pins SOIC integrated circuit and the TH area contains a lot of space for the needed components around your project. You can even stick a mini breadboard (not included) on the protoarea for solderless operation. The proto area includes also two power lines (IOREF and GND), two LEDs pads and SPI signals breakout pads for boards with SPI only on the ICSP header like Zero.

Power

The Proto Shield bring the power from the Arduino standard IOREF and GND pins to the two power bus rows placed between the Through Hole prototyping are, which can be used for powering correctly your project independently on the chosen board (3V3 or 5V).

SPI Connection

On the ICSP connector only 5V and GND are wired to the respective pins on the header. MOSI and MISO are present only on the connector and on the near extra pads. For more information about the SPI communication see the SPI library.

Physical Characteristics

The maximum length and width of the Proto Shield PCB are 2.7 and 2.1 inches respectively. Three screw holes allow the shield to be attached to a surface or case. Note that the distance between digital pins 7 and 8 is 160 mil (0.16"), not an even multiple of the 100 mil spacing of the other pins

Specifications

  • 1.0 Arduino Pinout
  • 1 ICSP Connector footprint
  • 2 LEDs and resistor footprint
  • IOREF and GND power lines
  • SPI signals pads
  • 24 pin SMD footprint (50 mils pitch)

Reviews

Add to Wish List Arduino Proto Shield Rev3 (Uno Size)
Product Code: ARD-TSX00083
€ 11.78
Ex. VAT
10 or more € 10.95 Ea. (-7%)
Need larger quantities? Ask for a quote!
  • 8 piece(s) in stock
  • Ordered before 17:00, shipped today.
  • Shipping from € 8.91 to United States
  • 30 days money back guarantee
  • Fast shipping from The Netherlands

Software

Download the latest Arduino IDE
The open-source Arduino Software (IDE) makes it easy to write code and upload it to the board. This software can be used with any Arduino board.

Specifications

General
Product CodeARD-TSX00083
BrandArduino
EAN7630049200791
MPNTSX00083
PlatformArduino
For use withArduino

You might like these as well

The Arduino Uno is the best board to start with electronics and coding. The Uno is the most widely used and best documented of the Arduino family.
€ 20.62 Ex. VAT
The Arduino Prototyping Shield makes it easy for you to design custom circuits.
€ 5.17 Ex. VAT
The MKR Proto Shield is a prototyping shield designed for your MKR board
€ 8.22 Ex. VAT
Arduino Uno WiFi Rev2 Arduino Uno WiFi Rev2
-15%
The Arduino UNO WiFi Rev.2 is the easiest point of entry to basic IoT with the standard form factor of the UNO family.
€ 38.60 Ex. VAT € 45.41
Fast shipping
Order before 17:00h (Mon-Fri) for same day shipping.
Money back guarantee
You have a 30-day return period on your order
Worldwide shipping
Shipped from the Netherlands using PostNL and DHL.