Arduino MKR WAN 1310 w/o Antenna

Arduino MKR WAN 1310 w/o Antenna
Arduino MKR WAN 1310 w/o Antenna
Arduino MKR WAN 1310 w/o Antenna
Arduino MKR WAN 1310 w/o Antenna
Arduino MKR WAN 1310 w/o Antenna
Arduino MKR WAN 1310 w/o Antenna
Arduino MKR WAN 1310 w/o Antenna
Arduino MKR WAN 1310 w/o Antenna

Description

Arduino MKR WAN 1310 allows you to build your next smart project. Ever wanted an automated house? Or a smart garden? Well, now it’s easy with the Arduino IoT Cloud compatible boards. It means: you can connect devices, visualize data, control and share your projects from anywhere in the world. Whether you’re a beginner or a pro, we have a wide range of plans to make sure you get the features you need.

The Arduino MKR WAN 1310 board provides a practical and cost effective solution to add LoRa® connectivity to projects  requiring low power. This open source board can be connected to the Arduino IoT Cloud.

Better and More Efficient

The MKR WAN 1310, brings in a series of improvements when compared to its predecessor, the MKR WAN 1300. While still based on the Microchip® SAMD21 low power processor, the Murata CMWX1ZZABZ LoRa® module, and the MKR family’s characteristic crypto chip (the ECC508), the MKR WAN 1310 includes a new battery charger, a 2MByte SPI Flash, and improved control of the board’s power consumption.

Improved Battery Power

The latest modifications have considerably improved the battery life on the MKR WAN 1310. When properly configured, the power consumption is now as low as 104uA! It is also possible to use the USB port to supply power (5V) to the board; run the board with or without batteries - the choice is yours.

On-board Storage

Data logging and other OTA (Over The Air) functions are now possible since the inclusion of the on board 2MByte Flash. This new exciting feature will let you transfer configuration files from the infrastructure onto the board, create your own scripting commands, or simply store data locally to send it whenever the connectivity is best. Whilst the MKR WAN 1310’s crypto chip adds further security by storing credentials & certificates in the embedded secure element.

These features make it the perfect IoT node and building block for low-power wide-area IoT devices.

Additional I2C Port

The MKR WAN 1310 has an additional connector meant as an extension of the I2C bus. It's a small form factor 5-pin connector with 1.0 mm pitch.

The I2C port, also referred to as the Eslov self-identification port within Arduino, comes with: SDA, SCL, GND, +5V, and an extra digital pin meant to send an alarm to the otherwise plain I2C devices connected to it.

Specifications

MicrocontrollerSAMD21 Cortex®-M0+ 32bit low power ARM MCU
Radio moduleCMWX1ZZABZ
Board Power Supply (USB/VIN)5V
Secure ElementATECC508
Supported Batteriesrechargeable Li-Ion, or Li-Po, 1024 mAh minimum capacity
Circuit Operating Voltage3.3V
Digital I/O Pins8
PWM Pins13 (0 .. 8, 10, 12, 18 / A3, 19 / A4)
UART1
SPI1
I2C1
Analog Input Pins7 (ADC 8/10/12 bit)
Analog Output Pins1 (DAC 10 bit)
External Interrupts8 (0, 1, 4, 5, 6, 7, 8, 16 / A1, 17 / A2)
DC Current per I/O Pin7 mA
CPU Flash Memory256 KB (internal)
QSPI Flash Memory2MByte (external)
SRAM32 KB
EEPROMno
Clock Speed32.768 kHz (RTC), 48 MHz
LED_BUILTIN6
USBFull-Speed USB Device and embedded Host
Antenna gain2dB (bundled pentaband antenna)
Carrier frequency433/868/915 MHz

Reviews

Add to Wish List Arduino MKR WAN 1310 w/o Antenna
Product Code: ARD-ABX00029
€ 39.63
Ex. VAT
  • 8 piece(s) in stock
  • Shipped on Friday when ordered now.
  • Shipping from € 8.91 to United States
  • 30 days money back guarantee
  • Fast shipping from The Netherlands

Software

Download the latest Arduino IDE
The open-source Arduino Software (IDE) makes it easy to write code and upload it to the board. This software can be used with any Arduino board.

Specifications

General
Product CodeARD-ABX00029
BrandArduino
EAN7630049201484
MPNABX00029
PlatformArduino
Technical
Input PlugMicro USB
Input Voltage5 VDC
Operating Voltage3.3 VDC
Output Voltage3.3 VDC
ProtocolWiFi
Other
Dimensions67.64 X 25 mm
Weight32g

You might like these as well

The MKR2UNO Adapter allows you to turn your Arduino UNO form factor based project into a MKR based one
€ 13.02 Ex. VAT
This universal LoRa & Sigfox Antenna Kit can be used with the LoPy, SiPy, LoPy4 and FiPy IoT Development boards.
€ 12.36 Ex. VAT
Arduino's tiniest form factor(only 45x18mm) with Bluetooth Low Energy and embedded inertial sensor, the Nano 33 BLE (with headers) is Arduino’s 3.3V compatible board in the smallest available form.
€ 25.58 Ex. VAT
The Nano 33 BLE Sense (with headers) is Arduino’s 3.3V AI enabled board in the smallest available form factor: 45x18mm.
€ 37.98 Ex. VAT
Fast shipping
Order before 17:00h (Mon-Fri) for same day shipping.
Money back guarantee
You have a 30-day return period on your order
Worldwide shipping
Shipped from the Netherlands using PostNL and DHL.