Arduino 4 Relays Shield

Arduino 4 Relays Shield
Arduino 4 Relays Shield
Arduino 4 Relays Shield
Arduino 4 Relays Shield
Arduino 4 Relays Shield
Arduino 4 Relays Shield

Description

The Arduino 4 Relays Shield is a solution for driving high power loads that cannot be controlled by Arduino's digital IOs, due to the current and voltage limits of the controller. The Shield features four relays, each relay provides 2 pole changeover contacts (NO and NC); in order to increase the current limit of each output the 2 changeover contacts have been put in parallel. Four LEDs indicate the on/off state of each relay.

Power

The shield doesn't need external power: it will be provided by the base board, through the 5V and 3.3V pins of the Arduino board used as base.
Input and Output

The relays are controlled by the following Arduino board pins: Relay 1 = Arduino pin 4 Relay 2 = Arduino pin 7 Relay 3 = Arduino pin 8 Relay 4 = Arduino pin 12 The shield features several TinkerKit input/output and communication interfaces. Connecting TinkerKit modules can simplify the creation of a project or a prototype. The on-board connectors are :

  • 2 TinkerKit Inputs: IN2 and IN3 (in white), these connectors are routed to the Arduino A2 and A3 analog input pins.
  • 2 TinkerKit Outputs: OUT5 and OUT6 (in orange), these connectors are routed to the Arduino PWM outputs on pins 5 and 6.
  • 2 TinkerKit TWI: these connectors (4-pin in white) are routed on the Arduino TWI interface. Both connect to the same TWI interface to allow you to create a chain of TWI devices.

Physical Characteristics

The maximum length and width of the 4 Relays Shield PCB are 2.7 and 2.1 inches respectively. Four screw holes allow the Shield to be attached to a surface or case. Note that the distance between digital pins 7 and 8 is 160 mil (0.16"), not an even multiple of the 100 mil spacing of the other pins.

Specifications

Thinker Kit interface2x TWI, 2x OUT, 2x IN
Interfaces with Arduino BoardDIO
Relays4 (60W)
Operating Voltage5 Volt
Current needs140 mA (with all releays on, about 35 mA each)
Single pole chargeover contact maximum current@ 30 V DC 2A
Maximum load voltage48 Volt
Maximum switching capacity60 Watt

Reviews

Arduino 4 Relays Shield
Product Code: ARD-A000110
€ 24.00
Ex. VAT
10 or more € 22.80 Ea. (-5%)
4 piece(s) in stock
  • Shipped on Wednesday when ordered now.
  • Shipping from € 9.00 to United States
  • 30 days money back guarantee
  • Fast shipping from The Netherlands

Software

Download the latest Arduino IDE
The open-source Arduino Software (IDE) makes it easy to write code and upload it to the board. This software can be used with any Arduino board.

Specifications

General
Product CodeARD-A000110
BrandArduino
EAN7630049200654
MPNA000110
PlatformArduino
For use withArduino
Technical
Input Voltage5 VDC
Plug BScrew Terminal
Other
Dimensions53 x 68.5 mm
Weight44g

You might like these as well

The Arduino Uno is the best board to start with electronics and coding. The Uno is the most widely used and best documented of the Arduino family.
€ 24.00 Ex. VAT
This is a 5V 2-Channel Relay interface board, ve able to control various appliances, and other equipment with large current.
€ 2.99 Ex. VAT
This is a 5V 4-Channel Relay interface board, Be able to control various appliances, and other equipments with large current.
€ 4.99 Ex. VAT
This is a 5V 8-Channel Relay interface board which can be used with an Arduino or Raspberry Pi.
€ 7.99 Ex. VAT
Fast shipping
Order before 17:00h (Mon-Fri) for same day shipping.
Money back guarantee
You have a 30-day return period on your order
Worldwide shipping
Shipped from the Netherlands using PostNL and DHL.