Adafruit DRV8871 DC Motor Driver Breakout Board - 3.6A Max

Adafruit DRV8871 DC Motor Driver Breakout Board - 3.6A Max
Adafruit DRV8871 DC Motor Driver Breakout Board - 3.6A Max
Adafruit DRV8871 DC Motor Driver Breakout Board - 3.6A Max
Adafruit DRV8871 DC Motor Driver Breakout Board - 3.6A Max
Adafruit DRV8871 DC Motor Driver Breakout Board - 3.6A Max
Adafruit DRV8871 DC Motor Driver Breakout Board - 3.6A Max
Adafruit DRV8871 DC Motor Driver Breakout Board - 3.6A Max
Adafruit DRV8871 DC Motor Driver Breakout Board - 3.6A Max
Adafruit DRV8871 DC Motor Driver Breakout Board - 3.6A Max
Adafruit DRV8871 DC Motor Driver Breakout Board - 3.6A Max

Description

Crank up your robotics with powerful Adafruit DRV8871 motor driver breakout board. This motor driver has a lot of great specs that make it useful for a wide variety of mechatronics. In particular, the simple resistor-set current limiting and auto-magic PWM support make it super easy to use with just about any brushed DC motor.

Check out the specs for the DRV8871:

  • 6.5V to 45V motor power voltage
  • Up to 5.5V logic level on IN pins
  • 565mΩ Typical RDS(on) (high + low)
  • 3.6A peak current
  • PWM control
  • Current limiting/regulation without an inline sense resistor
  • Undervoltage lockout
  • Overcurrent protection
  • Thermal shutdown

Using it is super simple. Connect your motor to the OUT terminal block. Power the board with 6.5-45VDC power on VMotor and provide the H-bridge input control on IN1 and IN2. You can even PWM the inputs and the driver chip will do the right thing.

You can set the current limiting with an external resistor Rlim. We solder in a 30K resistor by default for a ~2A current limit, however you can remove this resistor and/or solder a resistor over it to change the resistance and change the limit.

Each order comes with one fully assembled and tested motor driver breakout, two 2-pin terminal blocks and a small strip of header. Some light soldering is required to attach the header and terminal blocks but its a simple task that can be done with basic soldering equipment.

Reviews

Adafruit DRV8871 DC Motor Driver Breakout Board - 3.6A Max
Product Code: ADA-3190
€ 6.99
Ex. VAT
10 or more € 6.64 Ea. (-5%)
This product is out of stock
  • Shipping from € 61.36 to United States
  • 30 days money back guarantee
  • Fast shipping from The Netherlands

Specifications

General
Product CodeADA-3190
BrandAdafruit
MPNP3190

You might like these as well

This Raspberry Pi add-on HAT is perfect for any motion project as it can drive up to 4 DC or 2 Stepper motors with full PWM speed control.Since th..
€ 20.79 Ex. VAT
Spin two DC motors or step one bi-polar or uni-polar stepper with 1.2A per channel using the TB6612. If you want to control motors without a shield or..
€ 6.69 Ex. VAT
This is the DC Motor + Stepper FeatherWing which will let you use 2 x bi-polar stepper motors or 4 x brushed DC motors (or 1 stepper and 2 D..
€ 18.99 Ex. VAT
The Adafruit DRV2605L Haptic Motor Controller is a breakout board designed to drive haptic actuators such as ERM and LRA vibration motors. Using the I..
€ 7.29 Ex. VAT
The DRV8833 DC/Stepper Motor Driver Breakout Board is a compact solution for driving two DC motors or one bi-polar or uni-polar stepper motor. Built a..
€ 5.39 Ex. VAT
Fast shipping
Order before 17:00h (Mon-Fri) for same day shipping.
Money back guarantee
You have a 30-day return period on your order
Worldwide shipping
Shipped from the Netherlands using PostNL and DHL.
Thuiswinkel.org Lid