Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini Kit

Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini Kit
Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini Kit
Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini Kit
Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini Kit
Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini Kit
Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini Kit
Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini Kit
Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini Kit
Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini Kit
Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini Kit
Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini Kit
Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini Kit
Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini Kit
Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini Kit

Description

This Raspberry Pi add-on HAT is perfect for any motion project as it can drive up to 4 DC or 2 Stepper motors with full PWM speed control.

Since the Raspberry Pi does not have a lot of PWM pins, Adafruit use a fully-dedicated PWM driver chip onboard to both control motor direction and speed. This chip handles all the motor and speed controls over I2C. Only two pins (SDA & SCL) are required to drive the multiple motors, and since it's I2C you can also connect any other I2C devices or HATs to the same pins.

You can even stack multiple Motor HATs, up to 32 of them, for controlling up to 64 stepper motors or 128 DC motors.

Motors are controlled by TB6612 MOSFET drivers with 1.2A per channel and 3A peak current capability.

Specifications

  • 4 H-Bridges: TB6612 chipset provides 1.2A per bridge (3A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 13.5VDC.
  • Up to 4 bi-directional DC motors with individual 8-bit speed selection, about 0.5% resolution
  • Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping.
  • Big terminal block connectors to easily hook up wires (18-26AWG) and power
  • Polarity protected 2-pin terminal block and jumper to connect external 5-12VDC power
  • Works best with Raspberry Pi boards with 40-pin GPIO headers.

Comes with an assembled and by Adafruit tested HAT, terminal blocks, and 2x20 plain header. No soldering required!

Reviews

Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini Kit
Product Code: ADA-2348
€ 21.49
Ex. VAT
10 or more € 20.42 Ea. (-5%)
2 piece(s) in stock
Also add
  • Shipped on Wednesday when ordered now.
  • Shipping from € 9.00 to United States
  • 30 days money back guarantee
  • Fast shipping from The Netherlands

Specifications

General
Product CodeADA-2348
BrandAdafruit
MPNP2348
PlatformRaspberry Pi (ARM)
For use withRaspberry Pi 5
Raspberry Pi 4
Raspberry Pi 3 Model B+
Raspberry Pi 3 Model A+
Raspberry Pi Zero
Raspberry Pi 400
Technical
FrequencyPWM
Operating Voltage5 ~ 12 VDC
Output Current (Max)1.2A
Plug AScrew Terminals
ProtocolI2C
Other
Dimensions65mm x 56mm x 13mm

You might like these as well

This HAT from Adafruit adds their celebrated Ultimate GPS on it, so you can add precision time and location to your Raspberry Pi.
€ 29.49 Ex. VAT
Design your own Pi HAT, attach custom circuitry and otherwise dress your Pi A+, B+, or Pi 2 with this jaunty prototyping HAT kit with EEPROM
€ 7.19 Ex. VAT
Design your own Pi HAT, attach custom circuitry and otherwise dress your Raspberry Pi with this jaunty prototyping HAT kit without EEPROM
€ 4.79 Ex. VAT
The Explorer HAT Pro adds a lot of useful tools to your Raspberry Pi, like I/Os, touch pads, LEDs, motor drivers, mini breadboard and more!
€ 22.49 Ex. VAT
This touch-able add on HAT for Raspberry Pi has 12 capacitive touch sensors.
€ 14.49 Ex. VAT
Fast shipping
Order before 17:00h (Mon-Fri) for same day shipping.
Money back guarantee
You have a 30-day return period on your order
Worldwide shipping
Shipped from the Netherlands using PostNL and DHL.