USB / DC / Solar Lithium Ion/Polymer charger

USB / DC / Solar Lithium Ion/Polymer charger
USB / DC / Solar Lithium Ion/Polymer charger
USB / DC / Solar Lithium Ion/Polymer charger
USB / DC / Solar Lithium Ion/Polymer charger
USB / DC / Solar Lithium Ion/Polymer charger
USB / DC / Solar Lithium Ion/Polymer charger

Description

NOTE: This product is only designed for use with solar panels from Adafruit and Voltaic. We cannot guarantee this will work with other solar panels.

Make your projects to go green this summer with Adafruit's specialized USB/Solar Lithium Ion Polymer Battery charger! This charger is a very unique design, perfect for outdoor projects, or DIY iPod chargers.

Easy to use! Pick up any of our 3.7V/4.2V LiIon batteries, and a 6V solar panel. Plug the battery into the BATT port using a 2-pin JST cable and the solar panel into the DC jack using a 2.1mm terminal block adapter. Put the solar panel outside (and keep the battery out of the sun, it needs to be kept cool!) to start charging. You can power another project at the same time by connecting to the LOAD output port

Our carefully designed charger is designed specifically for solar charging, and will automatically draw the most current possible from the panel in any light condition!

Even thought it isn't a 'true' MPPT (max power point tracker), it has near-identical performance without the additional cost of a buck-converter. Adafruit has a detailed tutorial on how to use this charger includes a design document explaining how it all works.

For use with 3.7/4.2V batteries only!

Comes with an assembled charger board, a 2-pin JST cable that will fit into either the BATT or LOAD ports, and a large stabilization capacitor that must be installed in your finished project.

  • 3.7V/4.2V Lithium Ion or Lithium Polymer battery charger
  • Charge with 5-6V DC, USB or 6V solar panel!
  • Too dark out? Use a USB mini-B cable or a 5V DC adapter
  • Automatic charging current tracking for high efficiency use of any wattage solar panel
  • Use any 6V solar panel
  • Three color indicator LEDs - Power good, Charging and Done
  • Low Battery Indicator (fixed at 3.1V) with LED output
  • Set for 500mA max charge rate, can be adjusted from 50mA up to 1A by soldering in a resistor
  • Will always draw the most current possible from a solar cell - up to the max charge rate!
  • Smart load sharing automatically uses the input power when available, to keep battery from constantly charging/discharging
  • Temperature monitoring of battery by soldering in a 10K NTC thermistor (not included) - suggested for outdoor projects where the battery may get hot (50°C) or cold (0°C).

Reviews

Add to Wish List USB / DC / Solar Lithium Ion/Polymer charger
Product Code: ADA-390
€ 17.31
Ex. VAT
10 or more € 16.10 Ea. (-7%)
Need larger quantities? Ask for a quote!
  • 13 piece(s) in stock
  • Ordered before 17:00, shipped today.
  • Shipping from € 8.91 to United States
  • 30 days money back guarantee
  • Fast shipping from The Netherlands

Specifications

General
Product CodeADA-390
BrandAdafruit
MPNP390

You might like these as well

This battery has a 2500mAh capacity and comes with a 2-pin JST-PH2.0 connector soldered on.
€ 9.88 Ex. VAT
This battery has a 1200mAh capacity and comes with a 2-pin JST-PH2.0 connector soldered on.
€ 7.40 Ex. VAT
This extension cable can be used for our lithium batteries.
€ 1.86 Ex. VAT
Oh so adorable, this is the tiniest little lipo charger from Adafruit, so handy you can keep it any project box! Its also easy to use.
€ 5.74 Ex. VAT
This power plug is designed to fit in 5.5x2.1mm DC power sockets. Perfect for adding a (temporary) power plug to a cable. With the screw terminal block, this plug can be used anywhere!
€ 1.61 Ex. VAT
Fast shipping
Order before 17:00h (Mon-Fri) for same day shipping.
Money back guarantee
You have a 30-day return period on your order
Worldwide shipping
Shipped from the Netherlands using PostNL and DHL.