4.3 inch QLED DSI Touch Display for Raspberry Pi - 800x480

A 4.3 inch DSI QLED touchscreen for the Raspberry Pi. Mount your Raspberry Pi on the back, connect the screen to your Raspberry Pi via the supplied DSI cable and add the following data to your config.txt file so that the display functions properly:

dtoverlay=vc4-kms-v3d
dtoverlay=vc4-kms-dsi-7inch

For use with the Raspberry Pi 5 you'll add the following data to your config.txt file so that the display functions properly:

dtoverlay=vc4-kms-v3d
dtoverlay=vc4-kms-dsi-7inch,dsi0

If you use the screen i.c.m. Raspberry PiOS can install the function below to adjust the brightness to save energy, for example, after installation you will find it under Menu -> Accessories:

wget https://www.waveshare.com/w/upload/f/f4/Brightness.zip
unzip Brightness.zip
CD Brightness
sudo chmod +x install.sh
./install.sh

Features

• Resolution of 800x480
• 5 point touch
• 160 degree viewing angle
• IPS panel with tempered glass
• Supports Pi OS, Ubuntu, Kali and RetroPie
• DSI interface with a refresh rate of 60Hz